EUTITAN Grade 2 98 x 12 mm,
Advantages
- High quality
- Biocompatible
- Consistent properties
Properties
- Individual crowns in the anterior and posterior sector
- Bridge constructions in the anterior and posterior sector, with an appropriate cross-section
Description
EUTITAN® blanks for use in CAD/CAM milling machines. Pure titanium grade 2 respectively 4.
Product number:
224001
Questions about the product? We are glad to be here for you!
Product information "EUTITAN Grade 2 98 x 12 mm,"
EUTITAN® blanks for use in CAD/CAM milling machines.
EUTITAN pure titanium is a high quality material for the production of dental restorations, crowns and bridges from a CNC milling blank. For several years now, this material has been combining a well-known and appreciated biocompatibility with the desired consistent properties for its use in dental technology.
Indications:
- Individual crowns in the anterior and posterior sector
- Bridge constructions in the anterior and posterior sector, with an appropriate cross-section
Pure titanium grade 2, according to DIN ISO 5832-2
Type 10, Ø 98.4
Pure titanium grade 4, according to DIN ISO 5832-2
Type 10, Ø 98.4
EUTITAN® is a trademark of EUKAMED e.K.
Brochures and further information on this product
Cutsomers also bought
EUTITAN Grade 2 98 x 10 mm,
EUTITAN® blanks for use in CAD/CAM milling machines. EUTITAN pure titanium is a high quality material for the production of dental restorations, crowns and bridges from a CNC milling blank. For several years now, this material has been combining a well-known and appreciated biocompatibility with the desired consistent properties for its use in dental technology.Indications: Individual crowns in the anterior and posterior sector Bridge constructions in the anterior and posterior sector, with an appropriate cross-section Pure titanium grade 2, according to DIN ISO 5832-2Type 10, Ø 98.4 Pure titanium grade 4, according to DIN ISO 5832-2Type 10, Ø 98.4 EUTITAN® is a trademark of EUKAMED e.K.
Tizian Blank NEM fine 98 mm
Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%
Radius cutter, 2.0 mm, 1-cutter, polycarbonate/PMMA/wax/PEEK, Tizian Cut 5 smart
Radius cutter one-edged, edge Ø 2 mm, shaft Ø 3 mm, total length 40 mm Processing type: pilot drilling Blank material: PMMA, wax, PEEK, Polycarbonate Coating type: uncoated Ring color: black For milling machines: Tizian Cut 5 smart, Tizian Cut 5 smart plus
Radius cutter, 1.0 mm, 1-cutter, polycarbonate/PMMA/wax/PEEK, Tizian Cut 5 smart
Radius cutter one-edged, edge Ø 1 mm, shaft Ø 3 mm, total length 40 mm Processing type: fine finishing Blank material: PMMA, wax, PEEK, polycarbonate Coating type: uncoated Ring color: black For milling machines: Tizian Cut 5 smart, Tizian Cut 5 smart plus
EUTITAN Grade 2 98 x 15 mm,
EUTITAN® blanks for use in CAD/CAM milling machines. EUTITAN pure titanium is a high quality material for the production of dental restorations, crowns and bridges from a CNC milling blank. For several years now, this material has been combining a well-known and appreciated biocompatibility with the desired consistent properties for its use in dental technology.Indications: Individual crowns in the anterior and posterior sector Bridge constructions in the anterior and posterior sector, with an appropriate cross-section Pure titanium grade 2, according to DIN ISO 5832-2Type 10, Ø 98.4 Pure titanium grade 4, according to DIN ISO 5832-2Type 10, Ø 98.4 EUTITAN® is a trademark of EUKAMED e.K.
Single-toothed drill 2.5mm for wax + acrylic, Tizian Cut 5 Smart
Flat mill, single-edged, edge Ø 2.5 mm, shaft Ø 3 mm, total length 40 mm. The flat mill has an angle of 90°. Processing type: roughing Blank material: PMMA, wax, PEEK Type: uncoated Coding color: silver For the milling machines: Tizian Cut 5 smart, Tizian Cut 5 smart plus