Milling Machines

High end quality with future-oriented technology We developed the CORiTEC 650i and CORiTEC 650i Loader machine systems for the PREMIUM machine segment and for PREMIUM requirements. The systems are offered at a very attractive price and are equipped with high-quality industrial milling technologies, such as granite structure, linear drives in the linear axes, torque motors in the rotary axes, as well as digital absolute length measuring systems and powerful main spindles. The machine concept impresses with its precise, vibration-free and dynamic motion sequences in the demanding and complex metal working processes. All other relevant materials can also be milled or ground at high quality with this system (wet and/or dry machining). The CORiTEC 650i loader includes a fully integrated automatic 16-fold blank changer. This lets you to operate the machine system at full capacity around the clock without supervision, while maintaining consistent high precision. Thus, the machine system is ideally suited for large labs and milling centers, where these high quality standards and large quantities are required. Technical Highlights Solid axis structure made of polished natural granite for highly dynamic 5-axis simultaneous machining and for highly precise milling results Absolute, high-resolution measuring systems on all axes High-frequency spindle with up to 50,000 rpm and 2.3 kW with HSK 25 tool holder 32-fold fully automatic tool changer 16-fold fully automatic blank changer Integrated wet and dry machining for a multitude of materials and indications With touch screen-control Leading linear and torque motor technology Technical specifications Number of axes and machining type: 5-axis simultaneous machining Max. tilt angle for machining with 98 mm blank: A-axis +/- 30° / B-axis +/- 25° Wet processing: Integrated Maximum speed / Pmax~: 50,000 rpm / 2.3 kW Axle drives: Linear motors and torque motorsabsolute measuring systems, resolution of 0.5 ?m Tool fitting: HSK 25 Tool changer: 32-fold with chip protection cover Blank changer: with zero point clamping system / 16-fold fully automatic (loader) Weight: 930 kg Width x depth x height: 1325 x 1100 x 1940 mm Supply voltage / frequency / power: 400 V - 3 phase / 50/60 Hz / 2800 W Compressed air supply: 6-9 bar constant supply, 100 liters/minute Materials: CoCr/NEM, titanium, zirconium dioxide, aluminum oxide, PMMA, acrylics, composites, wax, glass ceramics, hybrid ceramics Compatibility: 98 mm/98.5 mm blanks, CAD/CAM blocks, nt-Trading prefabricated abutments, Medentika PreFace® abutments, Baltic Denture, Lava Frames

The Pro-Series for highest demands Designed for the modern requirements in CAD/CAM machining. Benefit from extremely high stability and low-vibration machining due to the new one-piece machine housing made from polymer concrete. What's more, the high-resolution dynamic servomotors with absolute measuring system facilitate an up to 20 % faster processing with optimal precision. Tizian 3.5 Loader Pro+ – The professional solution: The integrated zero-point clamping system facilitates the use of a multitude of adapter systems, such as glass ceramic adapters or different premilled systems. The machine processes restorations with a milling angle of up to 90 degrees with help of the innovative open blank holder. What's more, the Tizian 3.5 Loader Pro+ with its fully automated blank loader facilitates the multifarious processing of up to 12 blanks in unmanned operation. Your benefits: Revolutionary machine base made of polymer concrete for a greater rigidity and consequently, a higher precision Simultaneous five-axis machining Absolute measuring systems in all axes Dry and wet machining Machining of all significant materials in dentistry including metals Working angle of the axes of up to +/- 30 degrees 20-fold tool changer, covered Machining on the face of the blank is an option (B axis in 90 degree position) Jäger high frequency spindle with up to 60,000 rpm Blank loader for up to 12 blanks (different materials) Technical data Simultaneous five-axis machining Automated tool changer with 20 slots (optional) High frequency spindle, max. output power 240 V, 2.6 kW with 60,000 rpm, 6.5 bar, 100 l/min. Integrated wet machining function Integrated PC and touchscreen W/D/H ca. 1058 x 789 x 847 mm Weight ca. 250 kg Suited for these materials: Titanium Non-precious alloys Zirconium dioxide PMMA acrylics for temporary restorations and splints Wax Composite and Zirconia reinforced composite PEEK materials Acetal acrylics Polycarbonate With additional blank holder: glass ceramics and lithium disilicate** Prefabricated abutments** **Optional accessory

The ideal system for milled, adhesion-fixed secondary telescopic crowns and bridges. The milling systems Tizian 3.5 Pro and Tizian 3.5 Loader Pro were developed with an innovative machine concept which is adapted to today's demands on CAD/CAM production. Benefit from extraordinary stability and vibration-free processing due to the new one-part machine frame made from polymer concrete. Additionally, the high-definition, dynamic servo motors with an absolute measuring system facilitate a processing that is 20 % faster while still offering optimal precision. Tizian 3.5 Pro - The automated all-in-one solution: Mill nearly all conventional dental CAD/CAM materials with only one milling machine. The outstanding precision of the machine even lets you process highly complex restorations such as one-part implant-supported constructions. Using the standard blank holder, the restorations are milled in five axes, with milling angles of up to 30 degrees. These advantages make the ""Tizian 3.5 Pro""-product line an excellent choice that will come up to the demands of modern dental labs and milling centers. The compact design makes the machines an alternative not only for large dental labs and milling centers, but also for small and medium-sized dental labs. Tizian 3.5 Loader Pro - the pro solution: The integrated zero-point chuck system facilitates the use of a variety of adapter systems such as adapters for glass ceramic and different premilled systems. By using the novel open blank holder, you can mill restorations at angles of up to 90 degrees. What's more, the Tizian 3.5 Loader Pro with its fully automated blank storage lets you mill up to 12 different blanks in unmanned operation. Your benefits: Blank storage for up to 12 blanks of different materials Revolutionary machine frame made from polymer concrete Simultaneous 5-axis processing Absolute measuring system in all axis Up to 20 % faster processing Wet or dry milling Processing all significant materials in dental industry, including metal processing Axial angle of up to +/- 30 degrees  Milling of the front of the blank is possible (B-axis in 90 degree position) Jäger HF spindle with up to 60,000 rpm Technical data: Number of axis and type of processing: 5 axis simultaneouslyMax. milling angle when processing a 98 mm blank: A-axis +/- 30 degrees, B-axis +/- 25 degreesMax. axial angle A-axis: 360 degrees, B-axis: 115 degreesWet milling: integratedRevolution max./Pmax~: 60,000 rpm/1 kWAxial drive: AC servo motors with absolute encoder 0.15 µmTool receptacle: 6 mm shaftTool changer: 20-fold with protective cover against milling dustBlank changer: fully automated, 8-fold (optional: up to 12-fold)Weight: 250 kgWidth x depth x height: 1058 x 790 x 857 mmMains supply/frequency/performance: 100 V-240 V, 50/60 Hz, 2200 WCompressed air supply: 6-9 bar constant flow, 60 liter/minuteMaterials: CoCr/NEM, titanium, zirconium dioxide, aluminium oxide, PMMA, resins, composites, wax, glass ceramic, hybrid ceramic

The Pro-Series for highest demands Designed for the latest requirements in CAD/CAM machining. Benefit from extremely high stability and low-vibration machining thanks to the new one-piece machine housing made from polymer concrete. What's more, the high-resolution dynamic servomotors with absolute measuring system facilitate an up to 20 % faster processing with optimal precision. Tizian 3.5 Pro+ – The automated all-in-one solution: Mill all conventional CAD/CAM materials with only one machine. The extraordinary precision of the machine lets you produce even highly complex restorations such as e.g. one-piece implant-supported constructions. The standard blank holder is used to produce restorations with milling angles of up to 30 degrees. This makes the ""Tizian 3.5 Pro""-series an excellent choice for the high demands of dental laboratories and milling centers. It has been some time since Tizian milling machines have only attracted large dental labs and milling centers – with the latest, very compact design of the machines, they have also become a very popular option for small and medium-sized labs. Your benefits: Revolutionary machine base made of polymer concrete for a greater rigidity and consequently, a higher precision Simultaneous five-axis machining Absolute measuring systems in all axes Dry and wet machining Machining of all significant materials in dentistry, including metals Working angle of the axes of up to +/- 30 degrees 20-fold tool changer, covered Machining on the face of the blank is an option (B-axis in 90 degree position) Jäger high frequency spindle with up to 60,000 rpm Technical data Simultaneous five-axis machining Automated tool changer with 20 slots (optional) High frequency spindle, max. output power 240 V, 2.6 kW with 60,000 rpm, 6.5 bar, 100 l/min. Integrated wet machining function Integrated PC and touchscreen W/D/H ca. 758 x 790 x 857 mm Weight ca. 205 kg Suited for these materials: Titanium Non-precious alloys Zirconium dioxide PMMA acrylics for temporary restorations and splints Wax Composite and Zirconia reinforced composite PEEK materials Acetal acrylics Polycarbonate With additional blank holder: glass ceramics and lithium disilicate* Vorgefertigte abutments** **Optional accessory

The ideal system for milled, adhesion-fixed secondary telescopic crowns and bridges. The milling systems Tizian 3.5 Pro and Tizian 3.5 Loader Pro were developed with an innovative machine concept which is adapted to today's demands on CAD/CAM production. Benefit from extraordinary stability and vibration-free processing due to the new one-part machine frame made from polymer concrete. Additionally, the high-definition, dynamic servo motors with an absolute measuring system facilitate a processing that is 20 % faster while still offering optimal precision. Tizian 3.5 Pro - The automated all-in-one solution: Mill nearly all conventional dental CAD/CAM materials with only one milling machine. The outstanding precision of the machine even lets you process highly complex restorations such as one-part implant-supported constructions. Using the standard blank holder, the restorations are milled in five axes, with milling angles of up to 30 degrees. These advantages make the ""Tizian 3.5 Pro""-product line an excellent choice that will come up to the demands of modern dental labs and milling centers. The compact design makes the machines an alternative not only for large dental labs and milling centers, but also for small and medium-sized dental labs. Your benefits: Revolutionary machine frame made from polymer concrete Simultaneous 5-axis processing Absolute measuring system in all axis Up to 20 % faster processing Wet or dry milling Processing all significant materials in dental industry, including metal processing Axial angle of up to +/- 30 degrees  Milling of the front of the blank is possible (B-axis in 90 degree position) Jäger HF spindle with up to 60,000 rpm Technical data: Number of axis and type of processing: 5 axis simultaneously Max. milling angle when processing a 98 mm blank: A-axis +/- 30 degrees, B-axis +/- 25 degrees Max. axial angle A-axis: 360 degrees, B-axis: 115 degrees Wet milling: integrated Revolution max./Pmax~: 60,000 rpm/1 kW Axial drive: AC servo motors with absolute encoder 0.15 µm Tool receptacle: 6 mm shaft Tool changer: 20-fold with protective cover against milling dust Blank changer: manual with zero point chuck system (incl. 3 blank holders) Weight: 205 kg Width x depth x height: 758 x 790 x 857 mm Mains supply/frequency/performance: 100 V-240 V, 50/60 Hz, 2200 W Compressed air supply: 6-9 bar constant flow, 60 liter/minute Materials: CoCr/NEM, titanium, zirconium dioxide, aluminium oxide, PMMA, resins, composites, wax, glass ceramic, hybrid ceramic

iVAC expert - the extraction system for CORiTEC 650i and 650i Loader milling systems. Your benefits: High extraction capacity with 1000 m³/h and 100 liters filter capacity and HEPA-filter. Brush-free turbine guarantees a long service life. Ideal for CORiTEC 650i and 650i Loader. Technical data: Volume flow rate: 1000 m³/h Capacity: 2200 W Filter system: HEPA filter Filter capacity: 100 liters Width x depth x height 600 x 770 x1220 mm Mains voltage: 115 V/230 V

Zero-point clamping system for mounting material blocks. Facilitates the use of various adapters and clamping systems.  Furthmore, it makes a quick change of blanks (incl. the blank holder) possible.

This pleasantly designed cabinet was developed for the special requirements of Tizian Cut 5.2 plus and offers enough room for placing the machine. The robust wheels of the cabinet guarantee optimal stability and facilitate moving the machine. The cabinet contains drawers and cable ducts, and it accommodates the extraction system. Dimensions: 1060 x 930 x 790 mm (w x h x d)

This pleasantly designed cabinet was developed for the special requirements of Tizian Cut 5.2 and offers enough room for placing the machine. The robust wheels of the cabinet guarantee optimal stability and facilitate moving the machine. The cabinet contains drawers and cable ducts, and it accommodates the extraction system. Dimensions: 770 x 930 x 790 mm (w x h x d)

The zero-point clamping system incl. blank holder facilitates an easy exchange of blank and blank holder at the touch of a button.

The zero-point clamping system incl. blank holder facilitates an easy exchange of blank and blank holder at the touch of a button.