Radius cutter, 2,0 mm, diamond coating, zirconium dioxide, for Tizian Cut 5 smart

Milled blanks made from polyether ether ketone (PEEK) are ideally suited to the manufacture of removable replacement teeth. With suitable surface conditioning, PEEK can be dressed with common veneer composites. Benefits for you: Good gliding properties, so an ideal replacement for Galvanic electroplating High plaque resistance High elasticity at low E modulus MMA and benzoyl peroxide free Break resistant and highly resistant to chemicals X ray opaque Can be sterilised

With a translucency of 35 %.Indications:   Very aesthetic monolithic, fully anatomical crowns, partial crowns and bridges with up to 16-units, frameworks     Recommended for covering discolored tooth stumps or metal structures Advantages of monochromatic precolored blanks Why use precolored material? Applying a penetrating, homogeneous stain to the material does away with the need for processes such as dipping, painting and drying. This does not only save time and effort, but it also helps to avoid potential manual errors during the staining process. This reduces production costs and your customers will appreciate the consistent and reproducible color quality. Since the material comes fully precolored, even finishing or adjustment grinding do not leave light spots, which would have a negative effect on the appearance of the finished product. Industrially precolored zirconium blanks are reproducible. Precolored material is gentle on your sintering furnace and protects its components from damage. Acid-based liquid stains can emit fumes during the sintering process which leave deposits on the the heating elements of the furnace and contaminate them. This can cause undesirable discoloration and/or loss of translucency. Using industrially precolored zirconium ensures consistent color results. Suitable for: open milling system with a blank holder for round blanks with a diameter of 98.5 mm Material:   Zirconium type II, class 5 according to DIN EN ISO 6872   Good flexural strength of >, 1,150 MPa   Very high translucency of 35 % Good aging resistance Thin wall thicknesses for single crowns in the anterior tooth area 0.4 mm and in the posterior tooth area 0.6 mm   Biocompatible    

With a translucency of 35 %.Indications:   Very aesthetic monolithic, fully anatomical crowns, partial crowns and bridges with up to 16-units, frameworks     Recommended for covering discolored tooth stumps or metal structures Advantages of monochromatic precolored blanks Why use precolored material? Applying a penetrating, homogeneous stain to the material does away with the need for processes such as dipping, painting and drying. This does not only save time and effort, but it also helps to avoid potential manual errors during the staining process. This reduces production costs and your customers will appreciate the consistent and reproducible color quality. Since the material comes fully precolored, even finishing or adjustment grinding do not leave light spots, which would have a negative effect on the appearance of the finished product. Industrially precolored zirconium blanks are reproducible. Precolored material is gentle on your sintering furnace and protects its components from damage. Acid-based liquid stains can emit fumes during the sintering process which leave deposits on the the heating elements of the furnace and contaminate them. This can cause undesirable discoloration and/or loss of translucency. Using industrially precolored zirconium ensures consistent color results. Suitable for: open milling system with a blank holder for round blanks with a diameter of 98.5 mm Material:   Zirconium type II, class 5 according to DIN EN ISO 6872   Good flexural strength of >, 1,150 MPa   Very high translucency of 35 % Good aging resistance Thin wall thicknesses for single crowns in the anterior tooth area 0.4 mm and in the posterior tooth area 0.6 mm   Biocompatible    

With a translucency of 35 %.Indications:   Very aesthetic monolithic, fully anatomical crowns, partial crowns and bridges with up to 16-units, frameworks     Recommended for covering discolored tooth stumps or metal structures Advantages of monochromatic precolored blanks Why use precolored material? Applying a penetrating, homogeneous stain to the material does away with the need for processes such as dipping, painting and drying. This does not only save time and effort, but it also helps to avoid potential manual errors during the staining process. This reduces production costs and your customers will appreciate the consistent and reproducible color quality. Since the material comes fully precolored, even finishing or adjustment grinding do not leave light spots, which would have a negative effect on the appearance of the finished product. Industrially precolored zirconium blanks are reproducible. Precolored material is gentle on your sintering furnace and protects its components from damage. Acid-based liquid stains can emit fumes during the sintering process which leave deposits on the the heating elements of the furnace and contaminate them. This can cause undesirable discoloration and/or loss of translucency. Using industrially precolored zirconium ensures consistent color results. Suitable for: open milling system with a blank holder for round blanks with a diameter of 98.5 mm Material:   Zirconium type II, class 5 according to DIN EN ISO 6872   Good flexural strength of >, 1,150 MPa   Very high translucency of 35 % Good aging resistance Thin wall thicknesses for single crowns in the anterior tooth area 0.4 mm and in the posterior tooth area 0.6 mm   Biocompatible    

Radius cutter short, double-edged, edge Ø 2 mm, shaft Ø 6 mm, total length 45 mm. Max. blank height = short up to 15 mm, long up to 20 mm. Processing type: roughing Blank material: CoCr, titanium Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i

Aesthetics and durability combined to create a true multi-talent. The wonderful result of a merger between stability and natural beauty.Our new multi-talent is the ideal product to support you along your individual path to highly aesthetic and durable dental restorations. This blank follows the trend to combine the positive features of the already established zirconium quality of 3Y-TZP and the highly translucent 5Y-TZP. Just imagine mixing two different material classes... What could result from it is a unique raw material combination of a high-strength and highly translucent ZrO2. We just did it! When adding our new and innovative TILLY philosophy, the result was a multi-talented product which defines a completely new generation! Produce individual restorations for the anterior and posterior sector on natural tooth stumps and implants with priti®multidisc ZrO2 Multi Translucent.The special feature: graduation of shade and translucency with a simultaneous high flexural strength. These characteristics make priti®multidisc ZrO2 Multi Translucent an extraordinary and flexible choice for a wide range of indications.Benefits Excellent dental aesthetics Naturally graduated shade and translucency High stability: flexural strength >, 1,100 MPa (typical average) All processing techniques: painting technique, cut-back technique, veneering technique Quick sintering, complete processing time ca. 4 hours, released for up to 3 unit restorations High translucency in the incisal sector (>, 49 %), mechanical load capacity in the dentin sector Which is technique is your favorite?Select from these techniques: painting technique, cut-back technique, veneering technique. Indications: Individual restorations for the anterior and posterior sector on natural tooth stumps and implants  Highly aesthetic monolithic fully anatomic crowns, partial crowns and bridges of up to 14 units Inlays, onlays, veneers and abutments Quick sintering of restorations with up to 3 units Facts: Zirkonium dioxide type II, class 5 accordingt to DIN EN ISO 6872 Flexural strength: typical average ? 1,100 MPa Translucency graduation of <, 40 % to >, 49 % Thin wall thickness, in the anterior sector 0.4 mm and in the posterior sector 0.6 mm for individual crowns Precise margins and edges due to high density material Can be veneered with all ceramics which are adapted to the CTE of 10 · 10-6 · K-1 von ZrO2  Color stability across the batches Homogeneous coloration Reproducible colors Biocompatible