Sebond pink light, 5 g,

Advantages

  • Opaque and bonder all in one.
  • Excellent opacity and extremely high bonding strength.
  • Accomplished, harmonic results

Properties

  • For covering framework saddles and retentions

Description

Opaque and metal bonder all in one for coating framework retentions. Time-saving, highly aesthetic results and a secure bond.

Product number: 644090
Product information "Sebond pink light, 5 g,"

The bonding opaque with extremely good adhesion for a secure and lasting bond. Experience the high quality results and the extremely good handling.

You plan on completing frameworks? Then this is a great product for you!

 Indications:

  • For covering framework saddles and retentions

Your benefits:

  • Opaque and bonder all in one.
  • Excellent opacity and extremely high bonding strength.
  • Accomplished, harmonic results: Due to the color adaption of the opaque to the denture acrylic, visible clamps ""blend"" with the oral situation.
  • Excellent handling
  • Save time and money: Skip two working steps and forego the additional metal bonder.
  • Available in two shades (light and dark).
  • Monomer resistant and smudge-free acrylic.

 Contents:

  • 5 g syringe Sebond Pink  
"
Brochures and further information on this product

Cutsomers also bought

Sebond pink dark, 5 g,
The bonding opaque with extremely good adhesion for a secure and lasting bond. Experience the high quality results and the extremely good handling. You plan on completing frameworks? Then this is a great product for you!  Indications: For covering framework saddles and retentions Your benefits: Opaque and bonder all in one. Excellent opacity and extremely high bonding strength. Accomplished, harmonic results: Due to the color adaption of the opaque to the denture acrylic, visible clamps ""blend"" with the oral situation. Excellent handling Save time and money: Skip two working steps and forego the additional metal bonder. Available in two shades (light and dark). Monomer resistant and smudge-free acrylic.  Contents: 5 g syringe Sebond Pink   "
Details
T61 Tizian Cut 5/3.5 radius cutter 3.0 mm for Titan/CoCr, 4-bladed, 6 mm shaft
T61 - metal roughing tool The complex geometry of the four high-capacity cutting edges (this is not a radius cutter!) facilitate a smooth operation, a much better service life and time savings of up to 50 % during the roughing procedure. Metal restorations are manufactured within ca. 10-15 min. in extraordinary quality. Please note that the special cutter geometry  requires a new strategy and new tool data in the CAM software. This tool does not replace the reliable T6! Diameter Ø 3.0 mm Cutting edges quadruple edge Shaft Ø 6 mm Cutting length: l = 15 mm Total length: 45 mm Max. blank height: 15 mm  Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian Cut 5.2 Series, Tizian Cut 5, CORiTEC 550i, CORiTEC 650i
Details
FuturaGen liquid, 1000 ml,
The right prosthesis acrylic - when ""Good Enough"" just isn´t good enough. FuturaGen is the cold-curing acrylic with outstanding physical properties which sets new standards.   Benefits: Very high stability, making it also suitable for occlusal splints Extremely flat surface, reduces plaque accumulation Ideal for individualization, for example with Futura Intensiv paints, the PCS system and separate veins Very good fit due to low shrinkage: Also perfect for implant work "
Details
T12 Tizian Cut 5/3.5 PMMA finemilling single point mill, 1,0mm, 6 mm shaft
Radius cutter single-edged, edge Ø 1 mm, shaft Ø 6 mm, total length 53 mm, max. blank height = 25 mm. Processing type: fine finishing Blank material: PMMA, PEEK Coating type: uncoated Ring color: gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 650i
Details
Tizian Blank NEM fine 98 mm
Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%
Details
T2/T7 Tizian Cut 5/3.5 Metal Drill CoCr/Ti 2mm, 6 mm shaft
Radius cutter short, double-edged, edge Ø 2 mm, shaft Ø 6 mm, total length 45 mm. Max. blank height = short up to 15 mm, long up to 20 mm. Processing type: roughing Blank material: CoCr, titanium Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 650i
Details