Transfer cap for Mini implant conetop,
Description
For the closed impression technique with all IMPLA implants and Mini-conetop.
Product number:
635495
Questions about the product? We are glad to be here for you!
Product information "Transfer cap for Mini implant conetop,"
By attaching the acrylic cap this locks on cleanly to the impression post or directly onto the connection on the Mini-conetop implant. After a successful impression, the transfer cap remains in the impression and helps fix the corresponding laboratory analogue. The acrylic transfer cap is not suitable for use more than once!
Accessories
Mini Implant balltop 2.5/13.0 mm, sterile,
Variante:
2,5 mm / 13 mm
Just like their two part cousin, the single part implants in the IMPLA Mini range also have a high quality sanded and etched surface. Depending on the clinical case in question, the mini implants are also suitable for transgingival insertion, due to their size and shape. The short drilling protocol reduces the amount of surgery time needed. IMPLA Min implants are an economic alternative to two part implants. Benefits: The Mini balltop is perfectly suited for fixing full prostheses of diameter 2.10 mm ans 2.50 mm, ideal for minimally invasive insertion. Highly pure, sanded and etched surface for safe osseointegration. Self-tapping thread for fast, simple fitting.
Lab analogue for mini implant contop,
Titanium transfer element for accurate replication of implant position for Mini Conetop range implants. For the closed impression technique. ,
Mini Implant conetop, 3.0/9.5 mm, sterile,
Variante:
3 mm / 9,5 mm
Just like their two part cousin, the single part implants in the IMPLA Mini range also have a high quality sanded and etched surface. Depending on the clinical case in question, the mini implants are also suitable for transgingival insertion, due to their size and shape. The short drilling protocol reduces the amount of surgery time needed. IMPLA Min implants are an economic alternative to two part implants. The Mini-conetop is a particularly impressive with bar treatment where space is limited. Benefits: Low 3 mm diameter for a minimally invasive insertion. Highly pure, sanded and etched surface for safe osseointegration. Self-tapping thread for fast, simple fitting.
Cutsomers also bought
Adhesive base, 4.2 mm, (for Cone Connection)
Using this titanium base (titanium grade 5), you can glue both individual crowns and bridge constructions made from ZrO2. For this, we recommend Sebond Implant and Alphalink Implant.
Locator abutment D = 3.3 mm & 4.2 mm GH = 1.0, (Cone Connection)
Modern prosthetic solution with the original Zest Locator abutment for the cover denture / full denture fixing technique for full or partial prostheses. The prosthesis keeps its firm hold due to the cylindrical shape of the Locator. The special shape of the retention facilitates a low installation height and a divergence equalisation up to 15°. Also in various sizes of acrylic holding matrices for polymerisation for the Impla conical connection range.
Locator abutment D = 3.3 mm & 4.2 mm GH = 3.0, (Cone Connection)
Modern prosthetic solution with the original Zest Locator abutment for the cover denture / full denture fixing technique for full or partial prostheses. The prosthesis keeps its firm hold due to the cylindrical shape of the Locator. The special shape of the retention facilitates a low installation height and a divergence equalisation up to 15°. Also in various sizes of acrylic holding matrices for polymerisation for the Impla conical connection range.
Gingiva former conical 4.2/2 mm, (for Cone Connection), sterile
Titanium grade 5 healing component with processed emergence profile for implants in the conical connection range. With this, you can displace the gingiva without any pain, in order to prepare an aesthetically appropriate design of the final prosthesis. The formers can be fitted over the crestal 1.2 mm hexagonal connector both manually and mechanically. ,
Cylindrical (Hex Connection) 3.6/11.5 mm, sterile,
Whether it’s the upper or lower jaw, hard or soft bone - the IMPLA cylindrical implant is the answer to the everyday demands of implantology. The basic cylindrical shape is complemented by synchronous threading to the implant shoulder. In the same way, the surface of the cylindrical implant is sanded and etched to the implant shoulder. Alongside very good primary stability, even in cancellous bones, the cylindrical implant design gives you a high degree of flexibility. In particular, the insertion depth can be adapted very quickly by the surgeon. The self-tapping thread reduces the amount of surgery needed. Integrated Platform Switching ensures better preservation of the marginal bone. Benefits: Hex connection for rotation-secure connection between implant and abutment. Special micro-thread with a pitch of 0.8 mm for very high primary stability. Large Bone Lock for easy insertion and increased removal protection. Integrated Platform Switching to improve the soft tissue attachment. Self-tapping thread for a maximum level of surgical flexibility Microstructured, high-purity surface for optimal cell adaptation and safe osseointegration
Adhesive base D 4.2 mm,
Use this titanium base (titanium grade 5) to glue both individual crowns and bridge constructions made from ZrO2. We recommend the use of Sebond Implant and Alphalink Implant for this procedure.