Filter
The item has been added to your inquiry list
zebris double electrode FIAB Typ F3010, Noraxon type 272
For attaching the zebris EMG electrodes to the indicated position on the patient’s body.
priti®multidisc ZrO2 multicolor High Translucent, 98x 20, Colour B light
Variante:
98 x 20 mm / B light
Cubic zirconium, with a translucency of 49 %. Indications: Highly aesthetic monolithic, fully anatomical crowns, partial crowns and bridges with up to 3-units, inlays, onlays and veneers Highly recommended for partially or fully veneered highly aesthetic work Your benefits: highly aesthetic quick easy reproducible Suitable for: open milling system with a blank holder for round blanks with a diameter of 98.5 mm Material: Zirconium type II, class 4 according to DIN EN ISO 6872 Good flexural strength of >, 650 MPa Very high translucency of 49 %, comparable with lithium disilicate Superior aesthetics Very good resistance to aging Thin wall thicknesses for single crowns in the anterior tooth area 0.4 mm and in the posterior tooth area 0.6 mm Biocompatible
Cylindrical (Cone Connection) 4.5/9.5 mm, sterile,
Variante:
4,5 mm / 9,5 mm
The conical inner connector Cone Connection integrates the Platform Switching approach convincingly within the ""overall implant concept"", and is aimed at users who do not want to go without the features of an inner cone in their daily work. Whether it’s the upper or lower jaw, hard or soft bone - the IMPLA Cylindrical implant is the answer to the everyday demands of implantology. The basic cylindrical shape is complemented by synchronous threading to the implant shoulder. In the same way, the surface of the Cylindrical Implant is sanded and etched to the implant shoulder. Alongside very good primary stability, even in cancellous bones, the cylindrical implant design gives you a high degree of flexibility. In particular, the insertion depth can be adapted very quickly by the surgeon. The self-tapping thread reduces the amount of surgery needed. Special micro-thread with a pitch of 0.8 mm for very high primary stability. Large Bone Lock for easy insertion and increased removal protection
Cylindrical (Hex Connection) 5.5/13.0 mm, sterile,
Variante:
5,5 mm / 13 mm
Whether it’s the upper or lower jaw, hard or soft bone - the IMPLA cylindrical implant is the answer to the everyday demands of implantology. The basic cylindrical shape is complemented by synchronous threading to the implant shoulder. In the same way, the surface of the cylindrical implant is sanded and etched to the implant shoulder. Alongside very good primary stability, even in cancellous bones, the cylindrical implant design gives you a high degree of flexibility. In particular, the insertion depth can be adapted very quickly by the surgeon. The self-tapping thread reduces the amount of surgery needed. Integrated Platform Switching ensures better preservation of the marginal bone. Benefits: Hex connection for rotation-secure connection between implant and abutment. Special micro-thread with a pitch of 0.8 mm for very high primary stability. Large Bone Lock for easy insertion and increased removal protection. Integrated Platform Switching to improve the soft tissue attachment. Self-tapping thread for a maximum level of surgical flexibility Microstructured, high-purity surface for optimal cell adaptation and safe osseointegration
ReVeneer repair set,
In most cases, the ReVeneer Repair Set saves you from having to replace crowns or bridges. This gives you security. Aesthetically pleasing, intraoral, long-lasting, safe and acid-free. Benefits: No acid etching (no hydrofluoric acid or phosphoric acid) This makes intraoral application possible No silane as bonding agent Extremely high bond strength Little time needed Universal application Tested and optimized on all common ceramics (feldspar and glass ceramics, pressed ceramic, zirconium dioxide, aluminium oxide) Can be used with commercially available curing lamps (halogen, LED, plasma light) Precise application because of ReVeneer Base's green color. The change in color from green to clear makes the curing process visible and verifiable. The ReVeneer Repair Set consists of: 1 syringe (1 g) ReVeneer base 1 bottle (3 ml) ReVeneer primer 12 application tubes (0.9 x 13 mm) 1 brush holder 6 disposable brushes 1 syringe (3 g) opaquer universal light 1 syringe (3 g) opaquer universal dark 6 compules of composite A3.5 (0.3 g) 3 compules of composite A3 (0.3 g) 2 compules of composite A2 (0.3 g) 1 compule of composite B2 (0.3 g)
NanoPaq set (A2/A3/A3,5/A4), 4 x 4g syringe
NanoPaq is a light-curing nano composite for adhesive filling therapy with an ultrafine glass filler. Because of the ultrafine filler the results are very homogenous restorations. The specifically adapted ""chameleon effect"" will help you obtain an optimal color adaptation of the filling. The fillings are also easy to check because of the product's high radiopacity. All these facts make NanoPaq an excellent choice for your anterior and posterior restorations in all Black's classes. Content of the set: 4 x 4 g-syringe (colors: A2/A3/A3,5/A4) Available colors: Incisal masses: InW (white), InTr (transparent), InBl (bleach), InU (universal), IR (red) Dentin masses: A1, A2, A3, A3.5, A4, B1, B2, B3, C2, D3 Opaque dentin: OD A2, OD B2 "
Micro Retention implant 4.2/13.0 mm, (Cone Connection), sterile
Variante:
4,2 mm / 13 mm
Just like its cousin with the Hex Connection, this implant is particularly suitable for use with cancellous upper jaw bones, due to its special micro thread, but it also offers a quick and safe solution in hard bone. The conical inner connector Cone Connection integrates the Platform Switching approach convincingly within the overall implant concept, and is aimed at users who do not want to go without the features of an inner cone in their daily work.
Micro Retention implant 4.2/11.5 mm, sterile, (Hex Connection)
Variante:
4,2 mm / 11,5 mm
Our Micro-Retention implant is the result of persistent further development of renowned quality. Its specially conceived micro-thread helps it achieve an exceptional degree of primary stability and therefore, safety, even when the bone situation is not favourable, for example in cancellous upper jaw bones, or in the sinus area with reduced residual bone. You also have the option of working with Platform Switching here. The high precision Hex inner connection with rotation protection guarantees a secure connection between implant and abutment. Benefits: Hex connection for rotation-secure connection between implant and abutment Special micro-thread for very high primary stability Optimised thread design for improved primary stability even in soft bones Integrated Platform Switching to improve the soft tissue attachment Micro-constructed, highly pure surface for optimal cell adaptation and safe osseointegration
Tizian Blank Translucent 16er x 16 mm, Zirconium Dioxide
Variante:
16 mm
Highly translucent zirconium oxide blanks for best aesthetics. You can mill both monolithic and ceramic veneered crowns and bridges from this material. Indications: Inlays, onlays, bridges (up to 16 units), crowns, Maryland bridges and many more, can be veneered with ceramics (CTE 10.0x10-6K-1)
Tizian Blank Occlusal 98 x 12 mm, Zirconium Dioxide
Variante:
12 mm
The slightly translucent and isostatic pressed zirconium oxide is used for carrying out monolithic and ceramic veneer work. Indications: Inlays, onlays, bridges (up to 16 units) crowns, can be veneered with ceramics (CTE 10,1x10-6K-1), monolithic zirconium provisions and many more.
torque ratchet,
A socket for the different tools, such as screwdrivers and tighteners, is located on the head of the ratchet. It restricts the torque previously set on the tensioning screw - between 0 and 30Ncm - by slipping off the ratchet head. This torque limit can be disabled by twisting the head, in order to tighten implants into the perfect position, for example. The direction of rotation is marked on the ratchet head. We recommend taking the ratchet apart for purposes of cleaning and sterilisation.
Scan attachment/ tip (4 pcs.), for intra oral scanner i500
The small tip of the Intraoral Scanner i500 facilitates its handling and, at the same time, increases the precision of the result. What's more, it makes the treatment more comfortable for your patients. Tip size: 19 x 52 mm (w x h)
Tizian Blank 98 x 22 mm, Zirconium Dioxide
Variante:
22 mm
You can mill very high quality bridges, crowns and other frameworks for ceramic veneering using this isostatically pressed zirconium oxide. Indications: Bridges (up to 16 units), crowns, can be veneered with ceramic (CTE 10.6 x 10-6K-1), Maryland bridges and much more.
priti®multidisc ZrO2 multicolor Extra Translucent, 98 x 14, Color B light
Variante:
98 x 14 mm / B light
There is a new zirconium dioxide for everyone!priti®multidisc ZrO? multicolor Extra Translucent with a translucence of 45 % and flexural strength >, 1,150 MPa. A cleverly devised zirconium dioxide concept which is an outstanding choice for almost every user. It makes working matchlessly easy. Beautiful &, strong! Real aesthetics - one fits all! Indications: priti®multidisc ZrO? Extra Translucent are excellently suited to the production of monolithic fully anatomic and partially or fully veneered crowns and bridges with up to 16 units individual abutments for anterior and side teeth on abutment teeth and implants What makes this product so special is its well-balanced relationship between high transparency and flexural strength. This indicates it for an especially wide range of indications.Material: Zirconium dioxide type II, class 5 according to DIN EN ISO 6872 Flexural strength >, 1,150 MPa Exceptional transparency of 45 % Thin wall thickness in the anterior tooth range of 0.4 mm and in the side tooth range of 0.6 mm for individual crowns Precise margins and edges because of a highly condensed material Can be veneered with close to every commercially available ceramic material which is adjusted to the CTE 10 · 10-6 K-1 of ZrO? Batch-independent color accuracy Homogeneous colorization Reproducible colors Biocompatible
Tray Implantology Tools, empty, size M
Set up this IMPLA surgical box according to your individual needs. This compact tray comes without tools. In this tray, you can assort all instruments which are necessary for the insertion of an IMPLA Cylindrical or Micro Retention implant. As the tray manages without silicone plugs, it ensures maximum hygiene. There is an option to extend the tray.
EUTITAN Grade 4 98 x 12mm,
Variante:
EUTITAN Grade 4 98 x 12 mm
EUTITAN® blanks for use in CAD/CAM milling machines. EUTITAN pure titanium is a high quality material for the production of dental restorations, crowns and bridges from a CNC milling blank. For several years now, this material has been combining a well-known and appreciated biocompatibility with the desired consistent properties for its use in dental technology.Indications: Individual crowns in the anterior and posterior sector Bridge constructions in the anterior and posterior sector, with an appropriate cross-section Pure titanium grade 2, according to DIN ISO 5832-2Type 10, Ø 98.4 Pure titanium grade 4, according to DIN ISO 5832-2Type 10, Ø 98.4 EUTITAN® is a trademark of EUKAMED e.K.
sleeve holder,
The drilling sleeves are clipped into the sleeve holder and secured. The holder can be can be freely rotated through 360°, which makes it suitable for universal use in the patient’s mouth.
Relight sealing varnish,
Light-curing sealing lacquer for the surfaces of dentures and temporary crowns and bridges.
Locator abutment D = 3.3 mm & 4.2 mm GH = 3.0, (Cone Connection)
Variante:
3,3 mm & 4,2 mm / 3 mm
Modern prosthetic solution with the original Zest Locator abutment for the cover denture / full denture fixing technique for full or partial prostheses. The prosthesis keeps its firm hold due to the cylindrical shape of the Locator. The special shape of the retention facilitates a low installation height and a divergence equalisation up to 15°. Also in various sizes of acrylic holding matrices for polymerisation for the Impla conical connection range.
Locator abutment, D=5.3 mm GH=3.0,
Variante:
5,3 mm / 3 mm
TiN coated assembly for fixing overdentures. Individual axes on the implant may diverge by max, 20° (10° for implants with Ø 3.3 mm) and between two implants by max. 40° (20° for implants Ø 3.3 mm). ,The self-orienteering construction of the Locator® anchoring system supports the patient when inserting and fixing the prosthesis.
Measuring probe insert type B (3mm),
Measuring probe for scanning. Records hundreds of points on the surface per second. Thus, it can measure shapes, sizes and positions.
Measuring probe insert type B (1mm),
Measuring probe for scanning. Records hundreds of points on the surface per second. Thus, it can measure shapes, sizes and positions.
Frame slim, size M, slim, for 2 modules
Variante:
Rahmen Schmal
Keep everything in order: Set up two modules of your IMPLA surgical box in one frame. The frame is available in two qualities ""universal"" (art. no. 635105) and ""narrow"" (art. no. 635119)
.Conical connector 3,3 mm / 1 mm / 15°, Cone Connection incl. screw
Variante:
Konuskonnektor 3,3 mm / 1 mm / 15°
Set: The screw is included. This abutment made of titanium grade 5 with a conical implant connection geometry and a prefabricated emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Conical connector 5.3 mm / 1 mm / 15°, Cone Connection incl. screw
Variante:
Konuskonnektor 5,3 mm / 1 mm / 15°
Set: The screw is included. This abutment made of titanium grade 5 with a conical implant connection geometry and a prefabricated emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Tizian Blank Polycarbonate 98 x 16 mm, Color: A1
Variante:
A1 / 16 mm
Tizian Blank Polycarbonat is used for the production of bite splints as well as temporary crowns and bridges in the incisal and premolar sector (wearing time maximal 12 months). The flexibility of the acrylic compensates imprecisions in design and possibly slightly diverging insertion vectors. The material is less prone to fractures than PMMA. Tizian Blank Polycarbonat can be used for the production of even very graceful constructions. This feature helps you create life-like tooth shapes. What's more, Tizian Blank Polycarbonat in the shade ""clear"" is highly suitable for the production of bite splints for upper and lower jaw. Polycarbonate is suited to dry milling. We recommend the use of a robust 5-axis milling system to process the material. shade A1, A2: Flexible acrylic for the production of individual crowns, wide-span bridges and long-term temporaries. shade clear: Flexible clear acrylic for the production of bite splints Material properties E-module: 2400 MPa Bending strength: 100 MPa
Alphalink Implant, 2 x 4g cartridge incl. mixing cannula
For bonding titanium abutments to individualized zirconium dioxide abutments and supra-constructions. The full system consists of: Sebond Implant: The bonding agent prepares the zirconium dioxide surface for secure bonding. Alphalink Implant: The fixing composite bonds your framework to the abutment. Indications: Glue individual abutments to the corresponding adhesive base. Use this system for secure adhesion of supra constructions to abutments. Bond the following materials: Zirconium dioxide Precious metal Non-precious alloys Titanium Ceramics Unequaled bond strength values: Zirconium dioxide: >, 20 MPa Titanium: >, 30 MPa Benefits at a glance: The material offers the highest level of safety, as it was especially developed for bonding The system adapts to the user: Intraoral use = quick curing Use on models = longer working range High bond strength Long term stability due to the specially adapated formula Saves time Facilitates accurate work:The pasty consistency lets you remove excess material very easily Content: 2 x 4 g syringe Alphalink Implant, 10 mixing tips
torque wrench 4 Ncm,
Using this torque wrench the inner matrix is screwed into the matrix housing and set onto the patrix. Inner assembly matrices with blue acrylic inserts should not be used as permanent inner matrices in prostheses, they are intended exclusively for use in the dental laboratory.
Sebond Implant, 5 ml bottle
For bonding titanium abutments to individualized zirconium dioxide abutments or supra-constructions. The full system consists of: Sebond Implant: The bonding agent prepares the zirconium dioxide surface for secure bonding. Alphalink Implant: The fixing composite bonds your framework to the abutment. Indications: Glue individual abutments to the corresponding adhesive base. Use this system for secure adhesion of supra constructions to abutments. Bond the following materials: Zirconium dioxide Precious metal Non-precious alloys Titanium Ceramics Unequaled bond strength values: Zirconium dioxide: >, 20 MPa Titanium: >, 30 MPa Benefits at a glance: The material offers the highest level of safety, as it was especially developed for bonding The system adapts to the user: Intraoral use = quick curing Use on models = longer working range High bond strength Long term stability due to the specially adapated formula Saves time Facilitates accurate work:The pasty consistency lets you remove excess material very easily Content: 1 x 5 ml Sebond Implant
priti®multidisc ZrO2 Translucent, 98x 14, white
Variante:
14 mm / weiß
Available in 16 VITA shades and in white, with a translucency of 40 %.Indications: Very aesthetic monolithic, fully anatomical crowns, partial crowns and bridges with up to 16-units, frameworks Highly recommended for partially or fully veneered aesthetic work Advantages of monochromatic precolored blanks Why use precolored material? Applying a penetrating, homogeneous stain to the material does away with the need for processes such as dipping, painting and drying. This does not only save time and effort, but it also helps to avoid potential manual errors during the staining process. This reduces production costs and your customers will appreciate the consistent and reproducible color quality. Since the material comes fully precolored, even finishing or adjustment grinding do not leave light spots, which would have a negative effect on the appearance of the finished product. Industrially precolored zirconium blanks are reproducible. Precolored material is gentle on your sintering furnace and protects its components from damage. Acid-based liquid stains can emit fumes during the sintering process which leave deposits on the the heating elements of the furnace and contaminate them. This can cause undesirable discoloration and/or loss of translucency. Using industrially precolored zirconium ensures consistent color results. Suitable for: open milling system with a blank holder for round blanks with a diameter of 98.5 mm Material: Zirconium type II, class 5 according to DIN EN ISO 6872 Good flexural strength of >, 1,100 MPa High translucency of 40 % High aesthetics Very good resistance to aging Thin wall thicknesses for single crowns in the anterior tooth area 0.4 mm and in the posterior tooth area 0.6 mm Biocompatible
Conical connector 3.3/15° GH=3, (for Cone Connection)
Variante:
15°/3 mm
This abutment made of titanium grade 5 with conical implant connection geometry and ready-made emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Conical connector 4.2/15° GH=1, (for Cone Connection)
Variante:
15°/1 mm
This abutment made of titanium grade 5 with its conical implant connection geometry and its tailor-made emergence profile was specially developed for the IMPLA Cone Connection line. Supra constructions can be either cemented or adhesion-fixed. Available with gingiva heights of 1 mm, 3 mm or 5 mm and with angles of 0°, 15° or 20°.
Conical connector 5.3/15° GH=3, (for Cone Connection)
Variante:
15°/3 mm
This abutment made of titanium grade 5 with its conical implant connection geometry and its tailor-made emergence profile was specially developed for the IMPLA Cone Connection line. Supra constructions can be either cemented or adhesion-fixed.Available with gingiva heights of 1 mm, 3 mm or 5 mm and with angles of 0°, 15° or 20°.
Alphalink Cem semi transparent, 2 x 4g cartridge incl. mixing cannula
Variante:
Semi transparent
Alphalink Cem is a dual-curing fixing composite for natural teeth. Indications: Adhesive fixation of indirect restorations such as veneers, inlays, onlays, crowns and bridges. Suited to fixing restorations made from glass ceramics, zirconium dioxide, composite, Zirconia reinforced composite, precious metal, non-precious metal or titanium. Adhesive fixation of root pins and core build-ups (as core build-up material). Advantages: Extraordinary bonding strength on dentin and ceramics High radiopacity, radiopaque (210 % Al) Very high compressive strength of 290 MPa Automix cartridge for easy handling Transparent mixing tip High biocompatibility, as the material is free of Bis-GMA Long-term stability due to excellent physical properties Safe, because it is dual-curing Excellent aesthetics with three different colors Physical properties: E-module: 12.039 MPa bending strength: 118 MPa very high Vickers hardness: 549 MPa Curing time incl. working range: Room temperature ca. 21 °C (ca. 69.8 °F): ca. 7-9 min Intraoral 37 °C (ca. 98.6 °F): 3-4 min Sales units: 8 g automix cartridge Available colors: A2, A3, semi-transparent
priti®multidisc ZrO2 Opaque, 98x 14, Colour A2
Variante:
priti®multidisc ZrO2 Opaque, 98x 14
With a translucency of 35 %.Indications: Very aesthetic monolithic, fully anatomical crowns, partial crowns and bridges with up to 16-units, frameworks Recommended for covering discolored tooth stumps or metal structures Advantages of monochromatic precolored blanks Why use precolored material? Applying a penetrating, homogeneous stain to the material does away with the need for processes such as dipping, painting and drying. This does not only save time and effort, but it also helps to avoid potential manual errors during the staining process. This reduces production costs and your customers will appreciate the consistent and reproducible color quality. Since the material comes fully precolored, even finishing or adjustment grinding do not leave light spots, which would have a negative effect on the appearance of the finished product. Industrially precolored zirconium blanks are reproducible. Precolored material is gentle on your sintering furnace and protects its components from damage. Acid-based liquid stains can emit fumes during the sintering process which leave deposits on the the heating elements of the furnace and contaminate them. This can cause undesirable discoloration and/or loss of translucency. Using industrially precolored zirconium ensures consistent color results. Suitable for: open milling system with a blank holder for round blanks with a diameter of 98.5 mm Material: Zirconium type II, class 5 according to DIN EN ISO 6872 Good flexural strength of >, 1,150 MPa Very high translucency of 35 % Good aging resistance Thin wall thicknesses for single crowns in the anterior tooth area 0.4 mm and in the posterior tooth area 0.6 mm Biocompatible
Abutment holder set,
Set including an abutment holder (art.no. 635505), adapter pins hex connection (art.no. 635506) and cone connection (art.no. 635507, 635508).
Universal Drilling Guide,
The Universal Drilling Guide is a drilling aid and supports you when inserting the distal implants: Pilot drilling mesial without angulation. Starting from this situation you can align the implants with help of the Universal Drilling Guide in 0°, 20° and 30°. The Universal Drilling Guide is especially well suited for the Multi Unit System.
Tizian Blank Color intensive 98 x 10 mm, Pre-Colored Zirconium Dioxide
Variante:
intensive / 10 mm
The already pre-colored zirconium blanks are gentle on your sinter furnace and save you time, due to clean sintering without any additional coloring liquid. Indications: Bridges (up to 16 units), crowns, can be veneered with ceramics (CTE 10,1x10-6K-1), Maryland bridges and much more.
Aesthura Abutment 3.3 mm/GH 2.5 mm, Cone Connection incl. screw
Variante:
Aesthura Abutment 3,3 mm / GH 2,5 mm
Aesthura® abutments by Dr. Neumeyer stand out by their special construction characteristics: They have an advantageously low overall height while still offering a huge retention surface. The abutments have been optimized regarding their performance physiology and feature a nearly perfect anti-rotation protection. When attached to the implant, they ease a cement-free temporary restoration. These abutments are suitable for almost any indication, especially in cases with very little occlusal space available. Their special surface creates an extremely large adhesive surface towards the individual supraconstruction without having to add to its height. In addtion, the screw-fixed scan abutment ensures an optimal integration into the digital workflow.
ReVeneer Adhesive Set,
In most cases, the ReVeneer Repair Set saves you from having to replace crowns or bridges. This gives you security. Aesthetically pleasing, intraoral, long-lasting, safe and acid-free. Benefits: No acid etching (no hydrofluoric acid or phosphoric acid) This makes intraoral application possible No silane as bonding agent Extremely high bond strength Little time needed Universal application Tested and optimized on all common ceramics (feldspar and glass ceramics, pressed ceramic, zirconium dioxide, aluminium oxide) Can be used with commercially available curing lamps (halogen, LED, plasma light) Precise application because of ReVeneer Base's green color. The change in color from green to clear makes the curing process visible and verifiable. The ReVeneer Repair Set consists of: 1 syringe (1 g) ReVeneer Base 1 bottle (3 ml) ReVeneer Primer 12 application tips (0.9 x 13 mm) 1 brush holder 6 disposable brushes
Tizian Blank PMMA 20mm, color UD2 (A2), fluorescent, Enamel Plus Technology
Variante:
Tizian Blank PMMA 20mm, Farbe UD2 (A2)
Aesthetic system for acrylic temporaries Produce long-term temporary crowns and bridges with the fluorescent Tizian Blanks PMMA in 5 special shades. They stand out with their extraordinary physical properties. Indications: long-term temporary restorations (up to six months), suitable for veneering with composite. Your benefits: Ready to be used in milling unit without curing Fast working time and low cost Excellent mechanical properties for long terms temporary Antagonist friendly Low monomer residual Physical data: Hardness Vickers: 140 MPaFlexural strength: Min. 125 MPaE-module: 2500 MPaWater solubility: 1,1 ?g/mm3Water absorption: 21.2 ?g/mm3Residual monomer: 0,6%
Conical connector 4.2 mm / 5 mm / 0°, Cone Connection incl. screw
Variante:
Konuskonnektor 4,2 mm / 5 mm / 0°
Set: The screw is included. This abutment made of titanium grade 5 with a conical implant connection geometry and a prefabricated emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Tizian Block 5.0 Multilayer 5YZirconia, High Translucent, B light, 3 pieces
Variante:
Tizian Block 5.0 Multilayer 5YZirconia
For aesthetic, fully anatomical, monolithic restorations with up to three pontics.Tizian Block 5.0 Multilayer 5YZirconia is the material of choice for aesthetic, fully anatomical, monolithic restorations with up to three pontics. For an ultimate, vibrant aesthetic with 49% translucence, >,650 MPa flexural strength, integrated color gradient Indication:You can use Tizian Block 5.0 Multilayer 5YZirconia to fabricate inlays, onlays, veneers, partial crowns, anatomically reduced and monolithic, fully anatomical crowns and bridges (up to three pontics) for anterior and posterior areas Translucence is comparable to that of lithium disilicate. Its high translucence and integrated color gradient mean the material is particularly suitable for efficient fabrication of non-veneered restorations. Material: Zirconium dioxide Type II, Class 4 (DIN EN ISO 6872) High strength >, 650 MPa Very high translucence, 49%, comparable with Brilliant aesthetics CTE 10 -6 K-1 Thin wall thicknesses of 0.4 mm for single crowns in the anterior tooth area and 0.6 mm in the posterior tooth area Precise edges and margins due to highly compacted material Veneering possible with any ceramic mapped to the CTE of ZrO2 Cross-batch color fidelity Homogeneous block shading Color can be reproduced at any time Biocompatible Chemical Composition: Zirconium dioxide (ZrO2/HfO2): 89.89 - 90.7 %Yttrium oxide (Y2O3): 8.55 - 10.11 %Aluminum oxide (Al2O3): <, 0.2 %Other oxides: <, 0.7 %
Conical connector 3.3 mm individually millable incl. vertical screw, Hex connection
Variante:
Konuskonnektor 3,3 mm ind. fräsbar inkl. Vertikalschraube
This abutment made of titanium grade 5 is individually adjusted at the lab to strong divergences in IMPLA Hex Connection implants.
Conical connector 3.3 mm individ. millable, Cone Connection incl. screw
Variante:
Konuskonnektor 3,3 mm ind. fräsbar
Set: The screw is included. This abutment made of titanium grade 5 is individually adapted by the lab in case that implants of the IMPLA Cone Connection series show a strong angulation.
PrimeBond7,
3 in 1: Etching, Priming, Bonding in only one step directly in your patient's mouth!PrimeBond7 is a 7th generation self-etching and light-curing single-component adhesive that facilitates attaching standard filling composites (e.g. Capo Bulk Fill Plus or Capo Slow Flow) safely and reliably to natural tooth substances in just one step. Combine indirect restorations made of composite and ceramic (inlays, onlays, veneers, or crowns) with light-curing and dual-curing luting composites. An additional indication of the material is the repair of fractured composite fillings.The adhesive can be used for the self-etch or selective etch technique. Indications Direct, light-curing composite restorations on natural teeth Indirect restorations made of composite and ceramic (inlays, onlays, veneers, or crowns) with light-curing and dual-curing luting composites (e.g. Alphalink Cem) Repair of fractured composite fillings Compatible with standard light-curing composite materials Your benefits: Extraordinary, durable bond Quick and easy: etchant, primer, and bonding agent in one single bottle Reliable and safe: no risk of over-etching when using the self-etch technique Forms a homogeneous adhesive layer to reduce ‘pooling’ Clean work and economical use thanks to optimum drop control Gentle etching (pH value >, 2) reduces the risk of hypersensitivities No refrigeration necessary Good biocompatibility: free of both TEGDMA and MMA Physical PropertiesBond strength dentin: 26.0 MPaBond strength enamel: 24.0 MPapH value: >, 2Source: GDF Gesellschaft für dental Forschung Innovationen GmbH
Tizian Blank 5.0 translucent
Variante:
14 mm D3
Available in 7 VITA shades and in white, with a translucency of 40 %.Indications: Very aesthetic monolithic, fully anatomical crowns, partial crowns and bridges with up to 16-units, supra constructions Highly recommended for partially or fully veneered aesthetic work Advantages of monochromatic precolored blanksWhy use precolored material? Applying a penetrating, homogeneous stain to the material does away with the need for processes such as dipping, painting and drying. This does not only save time and effort, but it also helps to avoid potential manual errors during the staining process. This reduces production costs and your customers will appreciate the consistent and reproducible color quality. Since the material comes fully precolored, even finishing or adjustment grinding do not leave light spots, which would have a negative effect on the appearance of the finished product. Industrially precolored zirconium blanks are reproducible. Precolored material is gentle on your sintering furnace and protects its components from damage. Acid-based liquid stains can emit fumes during the sintering process which leave deposits on the the heating elements of the furnace and contaminate them. This can cause undesirable discoloration and/or loss of translucency. Using industrially precolored zirconium ensures consistent color results. Suitable for: open milling system with a blank holder for round blanks with a diameter of 98.5 mm Material: Zirconium type II, class 5 according to DIN EN ISO 6872 Good flexural strength of >, 1,150 MPa High translucency of 40 % High aesthetics Thin wall thicknesses for single crowns in the anterior tooth area 0.4 mm and in the posterior tooth area 0.6 mm Biocompatible