Filter
The item has been added to your inquiry list
drill 2mm for CAD/CAM, acrylic, Tizian Cut + Tizian Cut eco Plus
Radius cutter, double-edged, edge Ø 2 mm, shaft Ø 3 mm, total length 35 mm Processing type: roughing Blank material (Tizian Cut): PMMA, wax Blank material (Tizian Cut plus/ Tizian Cut eco plus): PMMA, wax, PEEK Type: uncoated Coding color: silver For the milling machines: Tizian Cut, Tizian Cut plus, Tizian Cut eco plus
open-end pick-up,
This open ended wrench is needed for transfer of the implant into the IPK wrench, and insertion via the drilling template. The open ended wrench can also be used for non-contact removal of the implant from the packing, even where the opening of the patient’s mouth is limited (Pick Up technique).
fine drill 1mm for wax and acrylic, Tizian Cut + Tizian Cut eco Plus
Radius cutter, double-edged, edge Ø 1 mm, shaft Ø 3 mm, total length 35 mm Processing type: fine finishing Blank material (Tizian Cut): PMMA, wax Blank material (Tizian Cut plus/ Tizian Cut eco plus): PMMA, wax, PEEK Type: uncoated Coding color: silver For the milling machines: Tizian Cut, Tizian Cut plus, Tizian Cut eco plus
Single-toothed drill 2.5mm for wax + acrylic, Tizian Cut 5 Smart
Flat mill, single-edged, edge Ø 2.5 mm, shaft Ø 3 mm, total length 40 mm. The flat mill has an angle of 90°. Processing type: roughing Blank material: PMMA, wax, PEEK Type: uncoated Coding color: silver For the milling machines: Tizian Cut 5 smart, Tizian Cut 5 smart plus
Universal drill 1,2 mm for wax, PMMA, zirconia, composites, Length 35 mm for Tizian Cut and Tizian Cut eco Plus
Universal mill with a length of 35 mm for your Tizian Cut bzw. Tizian Cut eco Plus. For processing blanks made from wax, PMMA, zirconium dioxide and composite.
Universal drill 1,2 mm for wax, PMMA, zirconia, composites, Length 40 mm for Tizian Cut 5 smart
Universal mill with a length of 40 mm for your Tizian Cut 5 smart. For finishing blanks made from wax, PMMA, zirconium dioxide and composite.
Calibration blank 98 x 10 mm, for Tizian Cut 5 smart / Cut 5 smart Plus
Use these blanks made of polyurethane foam to carry out test millings in the process of calibrating or re-measuring your Tizian Cut 5 Smart or Tizian Cut 5 Smart Plus. Produce special test copings to measure subsequently. Enter this data into the control system of milling machine.
drill 1mm for Cad Cam, zirconia,
Radius cutter, double-edged, edge Ø 1 mm, shaft Ø 3 mm, total length 35 mm Processing type: fine finishing Blank material: zirconium Type: uncoated Coding color: blue For the milling machines: Tizian Cut, Tizian Cut plus, Tizian Cut eco plus
zebris para-occlusal attachment with lip bow, for Tizian JMA Optic System by zebris
Attachment for fixing the measuring sensors to the lower jaw incl. the lip bow. surgical steel can be sterilized exclusively suitable to use with the Tizian JMA Optic System by zebris (not suitable to use with ultrasound based zebris systems!)
zebris para-occlusal attachment with labial arch (deep/cover bite), Tizian JMA Optic System by zebris
Attachment for fixing the measuring sensors to the lower jaw incl. the lip bow. surgical steel can be sterilized exclusively suitable to use with the Tizian JMA Optic System by zebris (not suitable to use with ultrasound based zebris systems!)
zebris upper headband for maxilla bow, for maxilla bow
Upper headband for fixing the upper jaw facial bow to the patient's head. Compatible with JMA and JMA+.
T11 Tizian Cut 5/Tizian 1.5/ 2.5/ 3.5 PMMA finemilling single point mill, 2,5mm, 3mm shaft
Radius cutter single-edged, edge Ø 2.5 mm, shaft Ø 3 mm, total length 48 mm, max. blank height = 25 mm. Processing type: pilot milling Blank material: PMMA, PEEK Coating type: uncoated Ring color: gold For these milling machines: Tizian Cut 5 without metal option (3 mm shaft)
T12 Tizian Cut 5/Tizian 1.5/ 2.5/ 3.5 PMMA finemilling single point mill, 1,0mm, 3mm shaft
Radius cutter single-edged, edge Ø 1 mm, shaft Ø 3 mm, total length 48 mm, max. blank height = 25 mm. Processing type: fine finishing Blank material: PMMA, PEEK Coating type: uncoated Ring color: gold For milling machines: Tizian Cut 5 without metal option (3 mm shaft)
Attachment with metal plate / bite fork adapter, for zebris coupling tray / bite fork
For the very first time, this innovation of the coupling tray in the zebris JMAnalyzer+ jaw measuring system (64 bit version) lets you transfer the real movements of your patient into the digital world. The data import into the Tizian CAD/CAM system (by Schütz Dental) is carried out with the patented coupling tray which is used as a face bow for the digital environment. Now, you can use the movement data of your patient with the Tizian Creativ RT CAD software. The name ""Real Movement"" describes it all! This tool of the zebris JMAnalyzer+ lets you exclusively record the real motion curve and the actual position of your patient's upper jaw. In the past, the virtual articulator could merely show the best possible simulation of the motion curve in relation to your patient's data. A recording of the actual state was not possible. From now on, you can record the real motion pattern of your patient and the actual course of motions in the mouth, and transfer this real data into the digital world via Tizian Creativ RT CAD software. The course of the movements is displayed in the software with help of the real jaw movements of the patient. This procedure is especially well suited for the production of fully anatomic (monolithic) restorations, which can be ground quickly and dynamically. The restoration is produced with an oustanding fit based upon the real situation inside the mouth and helps your patient keep a healthy and comfortable bite.
T12/T14 Tizian Cut 5/Tizian 1.5/ 2.5/ 3.5 zirconium/PMMA drill 1 mm, 3 mm shaft
Radius cutter, double-edged, edge Ø 1.0 mm, shaft Ø 3 mm, total length 48 mm. Max. blank height = 25 mm. Processing type: fine finishing Blank material: zirconium, PMMA, wax, Tizian Zirconia Reinforced Composite Type: uncoated Coding color: gold For the milling machines: Tizian Cut 5 without optional metal milling (3 mm shaft)
Universal drill 0,5 mm for wax, PMMA, zirconia, composites, Length 40 mm for Tizian Cut 5 smart
Universal mill with a length of 40 mm for your Tizian Cut 5 smart. For finishing blanks made from wax, PMMA, zirconium dioxide and composite.
Universal drill 0,5 mm for wax, PMMA, zirconia, composites, Length 35 mm for Tizian Cut and Tizian Cut eco Plus
Universal mill with a length of 35 mm for your Tizian Cut bzw. Tizian Cut eco Plus. For processing blanks made from wax, PMMA, zirconium dioxide and composite.
Double-toothed drill 1.2mm for wax + acrylic, Tizian Cut 5 Smart
Flat mill, double-edged, edge Ø 1.2 mm, shaft Ø 3 mm, total length 40 mm. The flat mill has an angle of 90°. Processing type: fabrication of screw seating, implants, bars Blank material: PMMA, wax, PEEK Type: uncoated Coding color: silver For the milling machines: Tizian Cut 5 smart, Tizian Cut 5 smart plus
insertion post hex,
Can be veneered with composite as a temporary structure, or adapted as an individual gingiva former. In the lab, the insertion post helps to position the carrier sleeve on the master model when making the 3D navigable drilling template.
MD-Kombi flask duplicating insert,
Component for MD Kombi flask: Muffle former and duplicating flask in one. This duplicating and investing system helps you save time and material.
zebris Para-occlusal Attachment 90, long Version, medical steel
Attachment for fixing the sensor to the lower jaw, surgical steel, can be sterilized, magnetic plate and tube, long version
acrylic pins, 2.5 mm,
Acts as a final check on the drilling template produced, on a soft plaster model e.g. alabaster. The pins are cut according to the checking protocol, and show the correct implementation of the plan on the checking protocol.
zebris positioning foil, for zebris model positioner
The zebris positioning foil is an adhesive foil to be used when positioning a model in Artex Articulator.
zebris coupling tray, bite fork, type SD
The innovation of the coupling tray in the zebris JMAnalyser+ jaw measuring system (64 bit version) lets you transmit the real movements of your patient to the digital world for the very first time. The data import into the Tizian CAD/CAM system (by Schütz Dental) is carried out with the patented coupling tray which is used as a face bow for the digital environment. Now, you can use the movement data of your patient with the Tizian Creativ RT CAD software. The name ""Real Movement"" describes it all! This tool of the zebris JMAnalyser+ lets you exclusively record the real motion curve and the actual position of your patient's upper jaw. In the past, the virtual articulator could merely show the best possible simulation of the motion curve in relation to your patient's data. A recording of the actual state was not possible. From now on, you can record the real motion pattern of your patient and the actual course of motions in the mouth, and transfer this real data into the digital world via Tizian Creativ RT CAD software. The course of the movements is displayed in the software with help of the real jaw movements of the patient. This procedure is especially well suited for the production of fully anatomic (monolithic) restorations, which can be ground quickly and dynamically. The restoration is produced with an oustanding fit based upon the real situation inside the mouth and helps your patient keep a healthy and comfortable bite.
zebris Occlusal Adapter (J-ATT), for attaching the UK sensor
Attachment for fixing the sensor to the lower jaw, medical steel, can be sterilized, magnetic plate + tubing (see item no. 522024)
Individual sleeve 2.5 mm (for Titanium sleeve set universal),
Variante:
2,5 mm
These titanium drill guide sleeves facilitate precise placement of drill for IMPLA implants of diameter 2.50 mm to 5.3 mm
drill guide sleeve 4.25/11.5 mm,
Variante:
4,25 mm / 11,5 mm
The accurate manufacture of the IMPLA 3D drill guide sleeves guarantees the implementation of the planned implant position.
drill guide sleeve thread cutter 4.2/13 mm,
Variante:
4,2 mm / 13 mm
The accurate manufacture of the Impla 3D drill guide sleeves guarantees the implementation of the planned implant position.
drill guide sleeve countersink 4.2,
Variante:
4,2 mm
The accurate manufacture of the IMPLA 3D drill guide sleeves guarantees the implementation of the planned implant position.
Carrier sleeve for drill templates,
The accurate manufacture of the IMPLA 3D carrier sleeves guarantees the implementation of the planned implant position.
zebris occlusal front tooth tray,
The occlusal attachment (item no. 522024 + 522018) is used in cases where there is a space issue, such as over bite or deep bite, and also for simpler recording such as articulator settings. The attachment is fixed to the anterior teeth with silicone.