Filter
The item has been added to your inquiry list
sleeve holder,
The drilling sleeves are clipped into the sleeve holder and secured. The holder can be can be freely rotated through 360°, which makes it suitable for universal use in the patient’s mouth.
Plaster drill 2,00mm for Impla 3D Theta,
Variante:
2 mm
With this, a corresponding hole in the plaster model is set up, in order to position the matching drilling sleeve.
Impla position key long (IPK long),
As part of prosthetic planning, accurately defines the position of the implant in the master model, and guarantees identical implementation during surgery.
insertion post hex,
Can be veneered with composite as a temporary structure, or adapted as an individual gingiva former. In the lab, the insertion post helps to position the carrier sleeve on the master model when making the 3D navigable drilling template.
acrylic pins, 2.5 mm,
Acts as a final check on the drilling template produced, on a soft plaster model e.g. alabaster. The pins are cut according to the checking protocol, and show the correct implementation of the plan on the checking protocol.
Individual sleeve 2.5 mm (for Titanium sleeve set universal),
Variante:
2,5 mm
These titanium drill guide sleeves facilitate precise placement of drill for IMPLA implants of diameter 2.50 mm to 5.3 mm
drill guide sleeve 4.25/11.5 mm,
Variante:
4,25 mm / 11,5 mm
The accurate manufacture of the IMPLA 3D drill guide sleeves guarantees the implementation of the planned implant position.
Carrier sleeve for drill templates,
The accurate manufacture of the IMPLA 3D carrier sleeves guarantees the implementation of the planned implant position.