Filter
The item has been added to your inquiry list
CORITEC 650i Loader, 5-axis dental miling machine
High end quality with future-oriented technology We developed the CORiTEC 650i and CORiTEC 650i Loader machine systems for the PREMIUM machine segment and for PREMIUM requirements. The systems are offered at a very attractive price and are equipped with high-quality industrial milling technologies, such as granite structure, linear drives in the linear axes, torque motors in the rotary axes, as well as digital absolute length measuring systems and powerful main spindles. The machine concept impresses with its precise, vibration-free and dynamic motion sequences in the demanding and complex metal working processes. All other relevant materials can also be milled or ground at high quality with this system (wet and/or dry machining). The CORiTEC 650i loader includes a fully integrated automatic 16-fold blank changer. This lets you to operate the machine system at full capacity around the clock without supervision, while maintaining consistent high precision. Thus, the machine system is ideally suited for large labs and milling centers, where these high quality standards and large quantities are required. Technical Highlights Solid axis structure made of polished natural granite for highly dynamic 5-axis simultaneous machining and for highly precise milling results Absolute, high-resolution measuring systems on all axes High-frequency spindle with up to 50,000 rpm and 2.3 kW with HSK 25 tool holder 32-fold fully automatic tool changer 16-fold fully automatic blank changer Integrated wet and dry machining for a multitude of materials and indications With touch screen-control Leading linear and torque motor technology Technical specifications Number of axes and machining type: 5-axis simultaneous machining Max. tilt angle for machining with 98 mm blank: A-axis +/- 30° / B-axis +/- 25° Wet processing: Integrated Maximum speed / Pmax~: 50,000 rpm / 2.3 kW Axle drives: Linear motors and torque motorsabsolute measuring systems, resolution of 0.5 ?m Tool fitting: HSK 25 Tool changer: 32-fold with chip protection cover Blank changer: with zero point clamping system / 16-fold fully automatic (loader) Weight: 930 kg Width x depth x height: 1325 x 1100 x 1940 mm Supply voltage / frequency / power: 400 V - 3 phase / 50/60 Hz / 2800 W Compressed air supply: 6-9 bar constant supply, 100 liters/minute Materials: CoCr/NEM, titanium, zirconium dioxide, aluminum oxide, PMMA, acrylics, composites, wax, glass ceramics, hybrid ceramics Compatibility: 98 mm/98.5 mm blanks, CAD/CAM blocks, nt-Trading prefabricated abutments, Medentika PreFace® abutments, Baltic Denture, Lava Frames
Tizian 3.5 Loader Pro + milling machine, incl. 2.6 kw high frequency spindle, 7 stainless steel blank holders
The Pro-Series for highest demands Designed for the modern requirements in CAD/CAM machining. Benefit from extremely high stability and low-vibration machining due to the new one-piece machine housing made from polymer concrete. What's more, the high-resolution dynamic servomotors with absolute measuring system facilitate an up to 20 % faster processing with optimal precision. Tizian 3.5 Loader Pro+ – The professional solution: The integrated zero-point clamping system facilitates the use of a multitude of adapter systems, such as glass ceramic adapters or different premilled systems. The machine processes restorations with a milling angle of up to 90 degrees with help of the innovative open blank holder. What's more, the Tizian 3.5 Loader Pro+ with its fully automated blank loader facilitates the multifarious processing of up to 12 blanks in unmanned operation. Your benefits: Revolutionary machine base made of polymer concrete for a greater rigidity and consequently, a higher precision Simultaneous five-axis machining Absolute measuring systems in all axes Dry and wet machining Machining of all significant materials in dentistry including metals Working angle of the axes of up to +/- 30 degrees 20-fold tool changer, covered Machining on the face of the blank is an option (B axis in 90 degree position) Jäger high frequency spindle with up to 60,000 rpm Blank loader for up to 12 blanks (different materials) Technical data Simultaneous five-axis machining Automated tool changer with 20 slots (optional) High frequency spindle, max. output power 240 V, 2.6 kW with 60,000 rpm, 6.5 bar, 100 l/min. Integrated wet machining function Integrated PC and touchscreen W/D/H ca. 1058 x 789 x 847 mm Weight ca. 250 kg Suited for these materials: Titanium Non-precious alloys Zirconium dioxide PMMA acrylics for temporary restorations and splints Wax Composite and Zirconia reinforced composite PEEK materials Acetal acrylics Polycarbonate With additional blank holder: glass ceramics and lithium disilicate** Prefabricated abutments** **Optional accessory
Tizian 3.5 Loader Pro, incl. 12x blank changer, 8 blank holder, wet processing & zero point clamping system
The ideal system for milled, adhesion-fixed secondary telescopic crowns and bridges. The milling systems Tizian 3.5 Pro and Tizian 3.5 Loader Pro were developed with an innovative machine concept which is adapted to today's demands on CAD/CAM production. Benefit from extraordinary stability and vibration-free processing due to the new one-part machine frame made from polymer concrete. Additionally, the high-definition, dynamic servo motors with an absolute measuring system facilitate a processing that is 20 % faster while still offering optimal precision. Tizian 3.5 Pro - The automated all-in-one solution: Mill nearly all conventional dental CAD/CAM materials with only one milling machine. The outstanding precision of the machine even lets you process highly complex restorations such as one-part implant-supported constructions. Using the standard blank holder, the restorations are milled in five axes, with milling angles of up to 30 degrees. These advantages make the ""Tizian 3.5 Pro""-product line an excellent choice that will come up to the demands of modern dental labs and milling centers. The compact design makes the machines an alternative not only for large dental labs and milling centers, but also for small and medium-sized dental labs. Tizian 3.5 Loader Pro - the pro solution: The integrated zero-point chuck system facilitates the use of a variety of adapter systems such as adapters for glass ceramic and different premilled systems. By using the novel open blank holder, you can mill restorations at angles of up to 90 degrees. What's more, the Tizian 3.5 Loader Pro with its fully automated blank storage lets you mill up to 12 different blanks in unmanned operation. Your benefits: Blank storage for up to 12 blanks of different materials Revolutionary machine frame made from polymer concrete Simultaneous 5-axis processing Absolute measuring system in all axis Up to 20 % faster processing Wet or dry milling Processing all significant materials in dental industry, including metal processing Axial angle of up to +/- 30 degrees Milling of the front of the blank is possible (B-axis in 90 degree position) Jäger HF spindle with up to 60,000 rpm Technical data: Number of axis and type of processing: 5 axis simultaneouslyMax. milling angle when processing a 98 mm blank: A-axis +/- 30 degrees, B-axis +/- 25 degreesMax. axial angle A-axis: 360 degrees, B-axis: 115 degreesWet milling: integratedRevolution max./Pmax~: 60,000 rpm/1 kWAxial drive: AC servo motors with absolute encoder 0.15 µmTool receptacle: 6 mm shaftTool changer: 20-fold with protective cover against milling dustBlank changer: fully automated, 8-fold (optional: up to 12-fold)Weight: 250 kgWidth x depth x height: 1058 x 790 x 857 mmMains supply/frequency/performance: 100 V-240 V, 50/60 Hz, 2200 WCompressed air supply: 6-9 bar constant flow, 60 liter/minuteMaterials: CoCr/NEM, titanium, zirconium dioxide, aluminium oxide, PMMA, resins, composites, wax, glass ceramic, hybrid ceramic
Tizian 3.5 Pro+ milling system, incl. 2.6 kW high frequency spindle
The Pro-Series for highest demands Designed for the latest requirements in CAD/CAM machining. Benefit from extremely high stability and low-vibration machining thanks to the new one-piece machine housing made from polymer concrete. What's more, the high-resolution dynamic servomotors with absolute measuring system facilitate an up to 20 % faster processing with optimal precision. Tizian 3.5 Pro+ – The automated all-in-one solution: Mill all conventional CAD/CAM materials with only one machine. The extraordinary precision of the machine lets you produce even highly complex restorations such as e.g. one-piece implant-supported constructions. The standard blank holder is used to produce restorations with milling angles of up to 30 degrees. This makes the ""Tizian 3.5 Pro""-series an excellent choice for the high demands of dental laboratories and milling centers. It has been some time since Tizian milling machines have only attracted large dental labs and milling centers – with the latest, very compact design of the machines, they have also become a very popular option for small and medium-sized labs. Your benefits: Revolutionary machine base made of polymer concrete for a greater rigidity and consequently, a higher precision Simultaneous five-axis machining Absolute measuring systems in all axes Dry and wet machining Machining of all significant materials in dentistry, including metals Working angle of the axes of up to +/- 30 degrees 20-fold tool changer, covered Machining on the face of the blank is an option (B-axis in 90 degree position) Jäger high frequency spindle with up to 60,000 rpm Technical data Simultaneous five-axis machining Automated tool changer with 20 slots (optional) High frequency spindle, max. output power 240 V, 2.6 kW with 60,000 rpm, 6.5 bar, 100 l/min. Integrated wet machining function Integrated PC and touchscreen W/D/H ca. 758 x 790 x 857 mm Weight ca. 205 kg Suited for these materials: Titanium Non-precious alloys Zirconium dioxide PMMA acrylics for temporary restorations and splints Wax Composite and Zirconia reinforced composite PEEK materials Acetal acrylics Polycarbonate With additional blank holder: glass ceramics and lithium disilicate* Vorgefertigte abutments** **Optional accessory
Tizian 3.5 Pro milling machine, incl. wet processing, polymer concrete, zero point clamping system & 2 blank holder
The ideal system for milled, adhesion-fixed secondary telescopic crowns and bridges. The milling systems Tizian 3.5 Pro and Tizian 3.5 Loader Pro were developed with an innovative machine concept which is adapted to today's demands on CAD/CAM production. Benefit from extraordinary stability and vibration-free processing due to the new one-part machine frame made from polymer concrete. Additionally, the high-definition, dynamic servo motors with an absolute measuring system facilitate a processing that is 20 % faster while still offering optimal precision. Tizian 3.5 Pro - The automated all-in-one solution: Mill nearly all conventional dental CAD/CAM materials with only one milling machine. The outstanding precision of the machine even lets you process highly complex restorations such as one-part implant-supported constructions. Using the standard blank holder, the restorations are milled in five axes, with milling angles of up to 30 degrees. These advantages make the ""Tizian 3.5 Pro""-product line an excellent choice that will come up to the demands of modern dental labs and milling centers. The compact design makes the machines an alternative not only for large dental labs and milling centers, but also for small and medium-sized dental labs. Your benefits: Revolutionary machine frame made from polymer concrete Simultaneous 5-axis processing Absolute measuring system in all axis Up to 20 % faster processing Wet or dry milling Processing all significant materials in dental industry, including metal processing Axial angle of up to +/- 30 degrees Milling of the front of the blank is possible (B-axis in 90 degree position) Jäger HF spindle with up to 60,000 rpm Technical data: Number of axis and type of processing: 5 axis simultaneously Max. milling angle when processing a 98 mm blank: A-axis +/- 30 degrees, B-axis +/- 25 degrees Max. axial angle A-axis: 360 degrees, B-axis: 115 degrees Wet milling: integrated Revolution max./Pmax~: 60,000 rpm/1 kW Axial drive: AC servo motors with absolute encoder 0.15 µm Tool receptacle: 6 mm shaft Tool changer: 20-fold with protective cover against milling dust Blank changer: manual with zero point chuck system (incl. 3 blank holders) Weight: 205 kg Width x depth x height: 758 x 790 x 857 mm Mains supply/frequency/performance: 100 V-240 V, 50/60 Hz, 2200 W Compressed air supply: 6-9 bar constant flow, 60 liter/minute Materials: CoCr/NEM, titanium, zirconium dioxide, aluminium oxide, PMMA, resins, composites, wax, glass ceramic, hybrid ceramic
Tizian JMA Optic System by zebris
Welcome to the world of functional digital dentistry - the new dimension of the function-oriented digital workflow: The JMA Optic - precise, safe, fast and economic! The JMA Optic System is based upon the latest optical sensor technology and thus, it is the latest development in the field of functional dentistry. Your benefits: Safe prosthetics Forensic backstop Documentation Additional profits Happy patients Digital image for your dental clinic Decisive advantage towards your competition Real Movement: Transfer real patient data or the settings of virtual articulators via a standardized XML-export to external CAD systems (Tizian CAD/CAM System). With this extraordinary feature, the system becomes an integral component of Schütz Dental's Digital Workflow for the production of functional dental prostheses. A patented bite tray creates a precise relation between the movement data of the measuring system and the tooth surfaces scanned by the model scanner (Tizian Smart-Scan Plus) or the Intraoral Scanner (i500). This tray is also a part of the new zebris transfer appliance and facilitates a smooth transfer of the position of the maxilla in relation to the skull to a mechanical articulator. Thus, the use of a mechanical facebow becomes unnecessary. Precise: The analyser consists of a manageable stand-alone headbow with a mandible sensor. Aside from scanning the condyle movement, the user can also record all six mobility levels of the mandible with high precision. Fast: The user has the option to operate the system via a USB interface or wireless via WiFi. The headbow is attached in just a few steps with the nasion support, a head band and the support parts fixed to spring-mounted sidebars. Enter a defined reference plane with the supplied T-stylus right on the head. Safe: The table-top mount contained in the basic system facilitates a safe storage of the measuring components, whereas the battery powered headbow can be charged simultaneously via the integrated inductive charger. The extremely small and light mandible sensor is fixed with the help of a magnet to the paraocclusal and occlusal attachments, and then it is connected to the lower-jaw teeth. The analysis software WINJAW+ with its modular setup can be handled intuitively and contains: a data base, the basic module for the determination of the setting parameters of mechanical and virtual articulators as well as the export function for real movements. Optional are additional modules for functional analysis, for position analysis of the condyles and for the determination of neuro-muscular jaw relations and the Plane Finder Module. The system contains: Electronic headbow Mandible sensor T-stylus Analysis software WINJAW+ with basic module articulator and data export Table mount/inductive charger Foot switch/manual switch (wireless) Attachments Instructions Transport case Optional: Various additional software modules The system is operated with a conventional computer equipped with the system software Windows 10. Basic color: white RAL 9003
iVAC expert suction unit,
iVAC expert - the extraction system for CORiTEC 650i and 650i Loader milling systems. Your benefits: High extraction capacity with 1000 m³/h and 100 liters filter capacity and HEPA-filter. Brush-free turbine guarantees a long service life. Ideal for CORiTEC 650i and 650i Loader. Technical data: Volume flow rate: 1000 m³/h Capacity: 2200 W Filter system: HEPA filter Filter capacity: 100 liters Width x depth x height 600 x 770 x1220 mm Mains voltage: 115 V/230 V
ARCA 20 preheating furnace,
Variante:
Arca 20
This pre-heating oven with high-precision temperature control gives you very accurate control over the expansion of your investment material. Technical data: Voltage: 230 V~, 50-60Hz Power rating: 2000, 3000 W ARCA 20 pre-heating oven Continuous operation at the highest temperatures: 1050 °C Peak: 1150 °C Casting ring intake Ø 80x55 mm:4-6 Oven size: W x D x H 390 x 440 x 500 mm Chamber size: W x D x H 170 x 210 x 120 mm Weight: 34 kg ARCA 30 pre-heating oven Continuous operation at the highest temperatures: 1050 °C Peak: 1150 °C Casting ring intake Ø 80x55 mm:8-12 Oven size: pre-heating oven 435 x 460 x 560 mm Chamber size: W x D x H 220 x 300 x 150 mm Weight: 56 kg
Zero point clamping system, for Tizian 3.5
Zero-point clamping system for mounting material blocks. Facilitates the use of various adapters and clamping systems. Furthmore, it makes a quick change of blanks (incl. the blank holder) possible.
Tizian 3.5 Loader Pro + unit desk, for Tizian 3.5 Pro + milling machine
This pleasantly designed cabinet was developed for the special requirements of Tizian Cut 5.2 plus and offers enough room for placing the machine. The robust wheels of the cabinet guarantee optimal stability and facilitate moving the machine. The cabinet contains drawers and cable ducts, and it accommodates the extraction system. Dimensions: 1060 x 930 x 790 mm (w x h x d)
Tizian 3.5 Loader unit desk, for Tizian 3.5 Loader milling machine
This pleasantly designed cabinet was developed for the special requirements of Tizian Cut 5.2 and offers enough room for placing the machine. The robust wheels of the cabinet guarantee optimal stability and facilitate moving the machine. The cabinet contains drawers and cable ducts, and it accommodates the extraction system. Dimensions: 770 x 930 x 790 mm (w x h x d)
Medentika PreFace abutment holder, for Tizian 3.5 and 3.5 Loader milling machines
MEDENTIKA® Preface® Abutment Holder for an effective production. Combine the MEDENTIKA® Preface® Abutment Holder with our Preface® Abutments and the Tizian Cut 5.2 or Tizian Cut 5.2 Plus milling machines.
zebris module EPA, for zebris JMT Function pro
The electronic position analysis of the condyles (EPA) allows you to compare different occlusion positions and it can thus lead you to detect possible pain vectors in the jaw joint. You will see how the position of the condyles in the joint changes. Additional measuring modules (optional) determine the palatinal posterior tooth correction as well as the analysis of mastication movements.
zebris module functional analysis, for zebris JMT Function pro
Additional module for recording all levels of freedom of movement in the lower jaw.
Microclean, cleaning unit,
The MicroClean cleaning system cleans dentures automatically, gently, and in a way that is appropriate for the material involved. Even the strongest contaminants such as plaque and tartar can be automatically removed by MicroClean without any difficulty. Even in difficult to reach areas. No matter whether it is a denture that the patient has already worn or a newly made one - MicroClean cleans, polishes and pre-polishes e.g. crowns or bridges quickly and without material abrasion right into the finest inter-dental areas, fissures and telescopic tips. Benefits: Perfect automatic cleaning Especially for difficult, difficult to access areas (e.g. load distribution clasp) Top quality surface conditioning without any frictional loss! (telescopic restorations) Easy removal of fixing cement Makes ultrasonic cleaning unnecessary Significantly more efficient work, free from interruptions Basic equipment: Needles long, 150 g Plastic container Tweezers, 18 cm Holding magnet, complete Stand-up display Measuring cylinder, 50 ml 2 x 500 ml cleaning fluid (green and orange) Technical Data: Voltage: 230 V~ Power output: 200 VA Speed: 1450 rpm Number of phases: 1 phase-N+PE Neutral conductor: loadable N~ Protective conductor: separate protective conductor (PE green/yellow) Protection class: I Protection type: covered Frequency: 50/60 Hz Noise level: < 65 dB (A) Dimensions (w x d x h): 185 x 175 x 195 mm Weight: 7 kg
Astron Clearsplint CAD/CAM Pro Super Economy Kit, 960g powder/ 720g monomer
Clearsplint® CAD/CAM pro – The ideal solution for indications such as relieving the joint in case of bruxism, protecting full metal crowns and implant-supported restorations, readjusting the bite etc. Benefits: Extremely break-proof, offers an optimal protection for the natural teeth Thermo-active flexibility for excellent, comfortable and stress-free wear Hypoallergenic, MMA-free (residual monomer MMA = 0 %) Self-adjusting with memory effect Long-lasting transparency – no yellow discoloration, as the material is free of amines Present the advantages of excellent wearing comfort and flexibility of the splint to your customers The splint is an optical highlight, because it remains complete transparet.
Module Implantology Tools, assembled, size M
Adapt your IMPLA surgical box according to your individual needs. This compact tray contains all tools necessary for the insertion of an IMPLA Cylindrical or Micro Retention implants. As the tray manages without silicone plugs, it provides for a maximum of hygiene. This tray can be extended optionally.
Blank holder for Tizian 3.5 Pro Plus machine, (not suitable for Tizian 3.5 Loader milling machine)
The zero-point clamping system incl. blank holder facilitates an easy exchange of blank and blank holder at the touch of a button.
Module Mini-Kit Implantology, assembled, size M
Adapt your IMPLA Mini surgical box according to your individual needs. This compact tray contains all necessary drills and tools for the preparation of the implant site and for the insertion of IMPLA Mini Balltop and Conetop implants. As the tray manages without silicone plugs, it provides maximum hygiene. There is an option to extend the tray.
zebris digital transfer table, for JMAnalyser+
The digital transfer table for the zebris JMAnalyser+ system facilitates the transfer of a jaw position to the Artex Articulator with help of a bite fork type SD. Scope of delivery: 3 bite forks type SD with screw thread Bite fork adapter System case 1 set of positioning screws (3 pcs. of each type) 5 positioning foils
Zebris digital transfer table, for Artex crtikulator with Splitex Split system
For your zebris JMAnalyser+ system or your Tizian JMA Optic system by zebris Facilitates the transfer of the jaw position to the Artex articulator with the Splitex® Split System. Includes 3 pc. bite fork, type SD with screw thread, bite fork adapter, set of positioning screws, 3 pc. fixing nuts, 5 pc. positioning foil and brief instructions.
Blank holder for Tizian 3.5 Loader milling machine,
The zero-point clamping system incl. blank holder facilitates an easy exchange of blank and blank holder at the touch of a button.
zebris module for database configuration, for zebris JMT Function pro
Save your very precious time with the zebris database configuration module. There are more important things to do than having to concern yourself with bureaucracy and data base maintenance.Until now, a fixed export path is specified e.g. for the storage of patient data on the server of your practice network. This additional module lets you freely choose the data base export path. What's more: The patient data is now not only saved on the local computer, but this module creates an automatic daily data backup on the server of your practice. Of course, manual backups are still possible.Your benefits: Free choice of the export path Daily automatic backup of your patient data Enormous time-savings, lightens your workload
Module Depth Stop long, assembled, size S
For an even higher level of safety in implantology Accessory for IMPLA surgical drills (with suitable drill collar), causes a mechanical depth stop when drilling in the jaw bone. Simply slip the depth stop over the shaft of the drill. They are available in three diameters: narrow (brown), medium (red) and wide (blue). The color code and the print that shows the drilling depth respectively the implant length facilitate a match with the correct drill. The depth stops are available in the according implant lengths.
Module Depth Stop short, assembled, size S
For an even higher level of safety in implantology Accessory for IMPLA surgical drills (with suitable drill collar), causes a mechanical depth stop when drilling in the jaw bone. Simply slip the depth stop over the shaft of the drill. They are available in three diameters: narrow (brown), medium (red) and wide (blue). The color code and the print that shows the drilling depth respectively the implant length facilitate a match with the correct drill. The depth stops are available in the according implant lengths.
Articulator Galetti,
Articulator for the individual adjustment of your plaster models. Benefits: Immediate fitting for checking the impression material: You can check you impression results, while the patient is still there. Optimized kinematic reduced subsidence error when compared with conventional articulators, also without face bow transfer. Ideal forfunctional diagnostic purposes/fast occlusion analysis. Fast preparation of registration aids: Whether it’s a para-occlusal tray, impression material templates for incisal pins, ballistic registrations or conventional centering plates. Fast fitting perfectly supports all technical preparations for an impression. Manufacture of perfectly fitting silicone keys for condyle position analysis (zebris EPA) in the correct relation to the jaw. Optimized work flow when making and checking splints. Immediate fitting after a new impression means you can grind a splint straight away in the articulator, in the same sitting.
Capo Natural Set (A2/A3/A3,5/B2/IM/Occ), 6 x 4 g-syringe
Capo Natural is an ultra fine micro-hybrid composite with optimized abrasion values. It is completely biocompatible due to the proven cell friendliness. Capo Natural from Schütz Dental allows you to work in a minimally invasive manner due to the optimized color adaptation. This minimizes the risk of secondary caries, without affecting the aesthetics. The benefits of Capo Natural: Bio-compatible and gentle on the gingiva Extraordinarily homogeneous restorations Works with most etching and bonding systems Suitable for minimally invasive surgery Bright, permanent colors High resistance to abrasion, combined with antagonist friendliness Easy to use Highly transparent incisal material Good polishing qualities Independent of any laboratory Low cost Excellent mechanical properties Indications: Direct anterior and posterior restorations in Black's classes I, II, III, IV and V Minimally invasive veneers and fillings Indirect restoration such as inlays, onlays and veneers Extensive fissure sealing in molars and premolars Core build-up Splinting loosened teeth Corrections of shape and color to improve aesthetics Content of the set: 6 x 4 g-syringe (colors: A2, A3, A3,5, B2, IM (=Incisal Medium), Occ (= Occlusal Clear)) "
Steribox S, empty, A8/ for 1 module
Variante:
für 1 Modul
Sterilization box available in sizes S, M and L, for the sterilization of surgical instruments.Dimensions size S (A8): Outside dimensions: 90 x 90 x 55 mmInternal dimensions: 65 x 60 x 47 mm Dimensions size M (A6): Outside dimensions: 190 x 110 x 60 mmInternal dimensions: 165 x 92 x 49 mm Dimensions size L (A4): Outside dimensions: 290 x 190 x 60 mmInternal dimensions: 265 x 165 x 49 mm Sterisafe® DURO Sterilization container Sterility barrier and packaging system made from high-performance plastics Suited to almost all steam sterilization procedures under vacuum at temperatures of 121°C (249.8 °F) and 134°C (273.2 °F) as well as to low-temperature sterilization with gas (FORM and EO) and to H2O2/H2O2-plasma (in the following: VH2O2). Only tools which are suited to multiple sterilization and to this sterilization procedure must be sterilized in Sterisafe® DURO. Sterisafe® DURO sterilization container made from high-performance plastics: are translucent are highly shock-resistant (no dents) are >, pH 10 reprocessable can be sterilized with steam, plasma, EO or FO. are maintenance-free (no seal, no erosion), upper and lower part of the container close bacteria-proof according to Pasteur's principle are proven to save downtimes and service cost of your instruments have been well-proven for many years Sterisafe® DURO sterilization container have been designed in accordance with national / international standards and regulations DIN EN 868-1 and -8: 1999 DIN EN ISO 11607-1 and -2: 2006 CE marking in accordance with MDD 93/42 EWG
Enamel Plus Temp intro kit,
Aesthetic System for Acrylic TemporariesBiocompatible** – Non-toxic** – Reduced Plaque Accumulation** – Fluorescent Aesthetic Temporary Restorations""Enamel plus Temp"" helps you to imitate the tooth function as well as its aesthetic appearance. Temporary restorations made of ""Enamel plus Temp"" are an excellent basis for a holistic, diagnostic treatment. This offers the opportunity to dentist and patient to make adjustments in the temporary restoration which can be transferred to the permanent restoration later.Your benefits: Only a few steps to obtain an outstanding color match Special incisal shades Natural shades, close to natural tooth shades Exceptionally high surface hardness for durable restorations Polishes quickly and easily Extraordinary physical properties Content: 4 x Dentin, 50 g: UD2 (A2), UD3 (A3), UD3.5 (A3.5), UD4 (A4) 1 x Universal Enamel UE2, 50 g 1 x Opalescent Blue Enamel, 50 g 1 x Self-curing monomer liquid, 100 ml ** Cytotoxicity test with direct cell contact ASTM F 813-83 and with Agar diffusion according to ASTM F895-84 with test extraction irritation and allergy sensititzation test according to Buehler, OECD 406-92 and DIR CEE 93/21.
zebris C-bow, for Tizian JMA Optic System by zebris
The new C-bow for your Tizian JMA Optic System by zebris replaces the former T-pointer. Enter a defined reference plane of your patient's head with the C-bow. With its quick and easy handling, this accessory will offer you an your patient an even higher level of comfort during the measuring procedure.
Bleach'n Smile Refill Set,
Refill pack for your Bleach’n Smile tooth whitening system. The set contains 5 Bleach’n Smile bleaching gel syringes with 35 % hydrogen peroxide. Bleach’n Smile Automix is an in-office bleaching gel, which is intended only for treatment in the dental practice. Indication: For labial tooth surfaces Also suited for devital teeth Endo bleaching Benefits: Dependable and easy, time-saving application Excellent in-depth effect by means of 35 % hydrogen peroxide (after mixing) pH-neutral and gentle on the natural teeth The safety clip helps avoiding air bubbles during storage Contents: 5 Bleach’n Smile bleaching gel syringes with 35 % hydrogen peroxide
priti®MPguide ZrO2 High Translucent,
The priti®MPguide High Translucent shows the positioning in the blank. This product lets you select the precise shade using pritidenta® zirconium. The priti®MPguide High Translucent: provides the full shade selection from all ZrO2 multicolor technology colors can be mapped to both shade systems, VITA classical® and VITA System 3D-Master®
Scan attachment/ tip (4 pcs.), for intraoral-scanner i700 wireless
Variante:
Scanaufsatz/Tip (4 Stück)
4 Scan-Aufsätze für Ihren Medit i700w/i700/i600 Intraoral-Scanner. Zur einfachen Anwendung im posterioren Bereich bei Patienten mit kleiner Mundhöhle Größe der Spitze: 14,8 x 19,0 mm (B x H) Bis zu 150x autoklavierbar
zebris double electrode FIAB Typ F3010, Noraxon type 272
For attaching the zebris EMG electrodes to the indicated position on the patient’s body.
Cylindrical (Cone Connection) 4.5/6.5 mm, sterile,
Variante:
4,5 mm / 6,5 mm
The conical inner connector Cone Connection integrates the Platform Switching approach convincingly within the ""overall implant concept"", and is aimed at users who do not want to go without the features of an inner cone in their daily work. Whether it’s the upper or lower jaw, hard or soft bone - the IMPLA Cylindrical implant is the answer to the everyday demands of implantology. The basic cylindrical shape is complemented by synchronous threading to the implant shoulder. In the same way, the surface of the Cylindrical Implant is sanded and etched to the implant shoulder. Alongside very good primary stability, even in cancellous bones, the cylindrical implant design gives you a high degree of flexibility. In particular, the insertion depth can be adapted very quickly by the surgeon. The self-tapping thread reduces the amount of surgery needed. Special micro-thread with a pitch of 0.8 mm for very high primary stability. Large Bone Lock for easy insertion and increased removal protection
Cylindrical (Hex Connection) 5.5/13.0 mm, sterile,
Variante:
5,5 mm / 13 mm
Whether it’s the upper or lower jaw, hard or soft bone - the IMPLA cylindrical implant is the answer to the everyday demands of implantology. The basic cylindrical shape is complemented by synchronous threading to the implant shoulder. In the same way, the surface of the cylindrical implant is sanded and etched to the implant shoulder. Alongside very good primary stability, even in cancellous bones, the cylindrical implant design gives you a high degree of flexibility. In particular, the insertion depth can be adapted very quickly by the surgeon. The self-tapping thread reduces the amount of surgery needed. Integrated Platform Switching ensures better preservation of the marginal bone. Benefits: Hex connection for rotation-secure connection between implant and abutment. Special micro-thread with a pitch of 0.8 mm for very high primary stability. Large Bone Lock for easy insertion and increased removal protection. Integrated Platform Switching to improve the soft tissue attachment. Self-tapping thread for a maximum level of surgical flexibility Microstructured, high-purity surface for optimal cell adaptation and safe osseointegration
NanoPaq set (A2/A3/A3,5/A4), 4 x 4g syringe
NanoPaq is a light-curing nano composite for adhesive filling therapy with an ultrafine glass filler. Because of the ultrafine filler the results are very homogenous restorations. The specifically adapted ""chameleon effect"" will help you obtain an optimal color adaptation of the filling. The fillings are also easy to check because of the product's high radiopacity. All these facts make NanoPaq an excellent choice for your anterior and posterior restorations in all Black's classes. Content of the set: 4 x 4 g-syringe (colors: A2/A3/A3,5/A4) Available colors: Incisal masses: InW (white), InTr (transparent), InBl (bleach), InU (universal), IR (red) Dentin masses: A1, A2, A3, A3.5, A4, B1, B2, B3, C2, D3 Opaque dentin: OD A2, OD B2 "
Micro Retention implant (Hex Connection)
Variante:
5,3 mm / 14,5 mm
Our Micro-Retention implant is the result of persistent further development of renowned quality. Its specially conceived micro-thread helps it achieve an exceptional degree of primary stability and therefore, safety, even when the bone situation is not favourable, for example in cancellous upper jaw bones, or in the sinus area with reduced residual bone. You also have the option of working with Platform Switching here. The high precision Hex inner connection with rotation protection guarantees a secure connection between implant and abutment. Benefits: Hex connection for rotation-secure connection between implant and abutment Special micro-thread for very high primary stability Optimised thread design for improved primary stability even in soft bones Integrated Platform Switching to improve the soft tissue attachment Micro-constructed, highly pure surface for optimal cell adaptation and safe osseointegration
Micro Retention implant (Cone Connection)
Variante:
3,3 mm / 11,5 mm
Just like its cousin with the Hex Connection, this implant is particularly suitable for use with cancellous upper jaw bones, due to its special micro thread, but it also offers a quick and safe solution in hard bone. The conical inner connector Cone Connection integrates the Platform Switching approach convincingly within the overall implant concept, and is aimed at users who do not want to go without the features of an inner cone in their daily work.
torque ratchet,
A socket for the different tools, such as screwdrivers and tighteners, is located on the head of the ratchet. It restricts the torque previously set on the tensioning screw - between 0 and 30Ncm - by slipping off the ratchet head. This torque limit can be disabled by twisting the head, in order to tighten implants into the perfect position, for example. The direction of rotation is marked on the ratchet head. We recommend taking the ratchet apart for purposes of cleaning and sterilisation.
Scan attachment/ tip (4 pcs.), for intra oral scanner i500
The small tip of the Intraoral Scanner i500 facilitates its handling and, at the same time, increases the precision of the result. What's more, it makes the treatment more comfortable for your patients. Tip size: 19 x 52 mm (w x h)
Tray Implantology Tools, empty, size M
Set up this IMPLA surgical box according to your individual needs. This compact tray comes without tools. In this tray, you can assort all instruments which are necessary for the insertion of an IMPLA Cylindrical or Micro Retention implant. As the tray manages without silicone plugs, it ensures maximum hygiene. There is an option to extend the tray.
Relight sealing varnish,
Light-curing sealing lacquer for the surfaces of dentures and temporary crowns and bridges.
Locator abutment D = 5.3 mm GH = 5.0, (Cone Connection)
Variante:
5,3 mm / 5 mm
Modern prosthetic solution with the original Zest Locator abutment for the cover denture / full denture fixing technique for full or partial prostheses. The prosthesis keeps its firm hold due to the cylindrical shape of the Locator. The special shape of the retention facilitates a low installation height and a divergence equalisation up to 15°. Also in various sizes of acrylic holding matrices for polymerisation for the Impla conical connection range.
Locator abutment, D=5.3 mm GH=2.0,
Variante:
5,3 mm / 2 mm
TiN coated assembly for fixing overdentures. Individual axes on the implant may diverge by max, 20° (10° for implants with Ø 3.3 mm) and between two implants by max. 40° (20° for implants Ø 3.3 mm). ,The self-orienteering construction of the Locator® anchoring system supports the patient when inserting and fixing the prosthesis.
Measuring probe insert type B (3mm),
Measuring probe for scanning. Records hundreds of points on the surface per second. Thus, it can measure shapes, sizes and positions.
Measuring probe insert type B (1mm),
Measuring probe for scanning. Records hundreds of points on the surface per second. Thus, it can measure shapes, sizes and positions.