FuturaGen, pink, 1000 g
Product number:
650923
Questions about the product? We are glad to be here for you!
Product information "FuturaGen, pink, 1000 g"
The right prosthesis acrylic - when ""Good enough"" just isn´t good enough.
FuturaGen is the cold-curing polymer with outstanding physical properties which sets new standards.
Your benefits:
- Very wide range of colors
- Minimal residual monomer content
- Very high stability, making it also suitable for occlusal splints
- Extremely flat surface, reduces plaque accumulation
- Ideal for individualization, for example with Futura Intensiv paints and separate veins
- Very good fit due to low shrinkage: Also perfect for implant work
| Pulver/Flüssigkeit: | Pulver |
|---|---|
| Verarbeitung: | Kaltpolymerisat |
Brochures and further information on this product
Cutsomers also bought
SEBOND opaquer pink, 8 g,
You can cover the retentions on your model cast work with this light-curing powder opaque system. ,
FuturaGen liquid, 1000 ml,
The right prosthesis acrylic - when ""Good Enough"" just isn´t good enough. FuturaGen is the cold-curing acrylic with outstanding physical properties which sets new standards. Benefits: Very high stability, making it also suitable for occlusal splints Extremely flat surface, reduces plaque accumulation Ideal for individualization, for example with Futura Intensiv paints, the PCS system and separate veins Very good fit due to low shrinkage: Also perfect for implant work "
T61 Tizian Cut 5/3.5 radius cutter 3.0 mm for Titan/CoCr, 4-bladed, 6 mm shaft
T61 - metal roughing tool The complex geometry of the four high-capacity cutting edges (this is not a radius cutter!) facilitate a smooth operation, a much better service life and time savings of up to 50 % during the roughing procedure. Metal restorations are manufactured within ca. 10-15 min. in extraordinary quality. Please note that the special cutter geometry requires a new strategy and new tool data in the CAM software. This tool does not replace the reliable T6! Diameter Ø 3.0 mm Cutting edges quadruple edge Shaft Ø 6 mm Cutting length: l = 15 mm Total length: 45 mm Max. blank height: 15 mm Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian Cut 5.2 Series, Tizian Cut 5, CORiTEC 550i, CORiTEC 650i
T3/T8 Tizian Cut 5/3.5 ball-headed metal drill 1,5, CoCr/Ti balltop
Ball-end mill, double-edged, edge Ø 1.5 mm, shaft Ø 6 mm, total length 48 mm Processing type: drilling a screw channel Blank material: CoCr, titanium Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 650i
Tizian Blank NEM fine 98 mm
Tizian Blanks NEM (non-precious metal) are made of beryllium-free and cadmium-free CoCr ceramic alloy according to DIN EN OSP 22674 and EN ISO 9693 for applications with thin cross-sections which are exposed to extreme forces. Examples are removable partial dentures, clasps, thin veneered individual crowns, fixed full arch dentures or bridges with small cross-sections, bars, fixations, implant-supported supraconstructions. Properties: Alloy type: 4Density: 8.8 g/cm³Vickers hardness: 285 HV 10/30CTE- value (25-500 °C): 14,4*10-6 K-1Oxidation without vacuum (Point 4c): 1000 °CMass content of the components (in weight-%)*: Co 63, Cr 29, Mo 6 / Mn x, Nb x, Si x, Fe xTensile strength: 680 MPa0.2 % yield point: 400 MPaElongation at break: 9 %E-module: 250 GPa *X= <, 1%