No results were found for the filter!
Aluminium container, empty, for sterile storage of 3D navigation instruments.
5 axis milling table for implementation of the 3D navigated plan onto the master model.
Acrylic insert with lid for sterilization and storage of the IMPLA 3D navigation instruments.
Consists of 10x bone screws L=10 mm, D = 1.2 mm and 10x L=7 mm, D=1.2 mm, screwdriver, elbow adapter & 2x drill

Scanspray even helps you scan in reflective objects perfectly. The very small particle size means the spray is barely noticeable.
Diamond radius face cutter for your Tizian milling system
Attachment for fixing the sensor to the lower jaw, surgical steel, can be sterilized, magnetic plate and tube, long version
Attachment for fixing the sensor to the lower jaw, medical steel, can be sterilized, magnetic plate + tubing
The occlusal attachment is used in cases where there is a space issue, such as over bite or deep bite, and also for simpler recording such as articulator settings. The attachment is fixed to the anterior teeth with silicone.
The counter sink is used to cut the implant bed in the IMPLA implants of the Micro Retention and Dual Surface range.
For placing in the carrier sleeves on the drilling template.
The thread cutter is used to pre-cut the implant thread in the IMPLA Dual Surface and Micro Retention range.
Drill guide sleeve for 2.00 mm, 2.50 mm, 3.15 mm and 4.25 mm IMPLA range drills.
You can mill very high quality bridges, crowns and other frameworks for ceramic veneering using this isostatically pressed zirconium oxide.
Diamond radius cutter for your Tizian milling system
End mill/ torus mill for your Tizian milling system
The pre-coloured zirconium oxide blank saves you time and money. Find out why these blanks are also so good for your sinter furnace here.
The CoCr round blank for milling crowns, bridges and bars. Read on for more information about ceramic veneering properties and other indication areas.
Highly translucent zirconium oxide blanks for best aesthetics. You can mill both monolithic and ceramic veneered crowns and bridges from this material. Indications: Inlays, onlays, bridges (up to 16 units), crowns, Maryland bridges and...
Highly translucent zirconium blanks for best aesthetics. You can mill both monolithic and ceramic blended crowns and bridges.
Mill bridges, crowns and other frameworks for ceramic veneering in excellent quality using this isostatically pressed zirconium dioxide.
Radius cutter for your Tizian milling system
Radius cutter short for your Tizian milling system
Radius cutter short for your Tizian milling system
A blank which combines the benefits of zirconium oxide and high-end acrylics. The bionic system is kind to antagonists and the jaw joint.
Viewed