Filter
The item has been added to your inquiry list
Tizian Blank Color intensive 98 x 10 mm, Pre-Colored Zirconium Dioxide
Variante:
intensive / 10 mm
The already pre-colored zirconium blanks are gentle on your sinter furnace and save you time, due to clean sintering without any additional coloring liquid. Indications: Bridges (up to 16 units), crowns, can be veneered with ceramics (CTE 10,1x10-6K-1), Maryland bridges and much more.
Tizian Blank PMMA 20mm, color UD2 (A2), fluorescent, Enamel Plus Technology
Variante:
Tizian Blank PMMA 20mm, Farbe UD2 (A2)
Aesthetic system for acrylic temporaries Produce long-term temporary crowns and bridges with the fluorescent Tizian Blanks PMMA in 5 special shades. They stand out with their extraordinary physical properties. Indications: long-term temporary restorations (up to six months), suitable for veneering with composite. Your benefits: Ready to be used in milling unit without curing Fast working time and low cost Excellent mechanical properties for long terms temporary Antagonist friendly Low monomer residual Physical data: Hardness Vickers: 140 MPaFlexural strength: Min. 125 MPaE-module: 2500 MPaWater solubility: 1,1 ?g/mm3Water absorption: 21.2 ?g/mm3Residual monomer: 0,6%
Tizian Block 5.0 Multilayer 5YZirconia, High Translucent, B light, 3 pieces
Variante:
Tizian Block 5.0 Multilayer 5YZirconia
For aesthetic, fully anatomical, monolithic restorations with up to three pontics.Tizian Block 5.0 Multilayer 5YZirconia is the material of choice for aesthetic, fully anatomical, monolithic restorations with up to three pontics. For an ultimate, vibrant aesthetic with 49% translucence, >,650 MPa flexural strength, integrated color gradient Indication:You can use Tizian Block 5.0 Multilayer 5YZirconia to fabricate inlays, onlays, veneers, partial crowns, anatomically reduced and monolithic, fully anatomical crowns and bridges (up to three pontics) for anterior and posterior areas Translucence is comparable to that of lithium disilicate. Its high translucence and integrated color gradient mean the material is particularly suitable for efficient fabrication of non-veneered restorations. Material: Zirconium dioxide Type II, Class 4 (DIN EN ISO 6872) High strength >, 650 MPa Very high translucence, 49%, comparable with Brilliant aesthetics CTE 10 -6 K-1 Thin wall thicknesses of 0.4 mm for single crowns in the anterior tooth area and 0.6 mm in the posterior tooth area Precise edges and margins due to highly compacted material Veneering possible with any ceramic mapped to the CTE of ZrO2 Cross-batch color fidelity Homogeneous block shading Color can be reproduced at any time Biocompatible Chemical Composition: Zirconium dioxide (ZrO2/HfO2): 89.89 - 90.7 %Yttrium oxide (Y2O3): 8.55 - 10.11 %Aluminum oxide (Al2O3): <, 0.2 %Other oxides: <, 0.7 %
Tizian Blank 5.0 translucent
Variante:
14 mm D3
Available in 7 VITA shades and in white, with a translucency of 40 %.Indications: Very aesthetic monolithic, fully anatomical crowns, partial crowns and bridges with up to 16-units, supra constructions Highly recommended for partially or fully veneered aesthetic work Advantages of monochromatic precolored blanksWhy use precolored material? Applying a penetrating, homogeneous stain to the material does away with the need for processes such as dipping, painting and drying. This does not only save time and effort, but it also helps to avoid potential manual errors during the staining process. This reduces production costs and your customers will appreciate the consistent and reproducible color quality. Since the material comes fully precolored, even finishing or adjustment grinding do not leave light spots, which would have a negative effect on the appearance of the finished product. Industrially precolored zirconium blanks are reproducible. Precolored material is gentle on your sintering furnace and protects its components from damage. Acid-based liquid stains can emit fumes during the sintering process which leave deposits on the the heating elements of the furnace and contaminate them. This can cause undesirable discoloration and/or loss of translucency. Using industrially precolored zirconium ensures consistent color results. Suitable for: open milling system with a blank holder for round blanks with a diameter of 98.5 mm Material: Zirconium type II, class 5 according to DIN EN ISO 6872 Good flexural strength of >, 1,150 MPa High translucency of 40 % High aesthetics Thin wall thicknesses for single crowns in the anterior tooth area 0.4 mm and in the posterior tooth area 0.6 mm Biocompatible
Astron Clearsplint Blank 98 x 20 mm,
Blank manufactured of CLEARsplint® - no mixing and refilling anymore. Ø 98 x 20 mm blank with shoulder for all conventional large milling units
Astron Clearsplint CAD/CAM Pro Starterkit, 1 metal base plate / 3 fixation clamps
Kick off with the CLEARsplint® CAD/CAM Pro Starter Kit and mill high quality therapeutic splints for your patients. In order to mill a splint from CLEARsplint®, you will need the CLEARsplint® CAD/CAM Pro Starter Kit. This kit consists of: - 1 metal base plate- 3 fixing clamps- 1 filling blank, PMMA transparent
Thread cutter 3.3/14.5 mm for IMPLA 3D,
Variante:
3,3 mm / 14,5 mm
By pre-cutting the thread, the final torque is reduced, particularly on the bones D1 and D2, which prevents overheating and excessively strong compression. The thread cutter is used in computer-navigated implantology.
Radius cutter, 0,6 mm, diamond coating, zirconium dioxide, for Tizian Cut 5 Smart
Radius cutter, double-edged, edge Ø 0.6 mm, shaft Ø 3 mm, total length 40 mm Processing type: removal of material residue Blank material: zirconium dioxide Coating type: diamond Ring color: dark blue For milling machine: Tizian Cut 5 smart, Tizian Cut 5 smart plus Up to seven times greater tool life "
Radius cutter, 2,0 mm, diamond coating, zirconium dioxide, for Tizian Cut 5 smart
Radius cutter, triple-edged, edge Ø 2 mm, shaft Ø 3 mm, total length 40 mm Processing type: pilot milling Blank material: zirconium dioxide Coating type: diamond Ring color: dark blue For milling machine: Tizian Cut 5 smart, Tizian Cut 5 smart plus Up to seven times greater tool life "
Radius cutter, 1,0 mm, diamond coating, zirconium dioxide, for Tizian Cut 5 smart
Radius cutter, double-edged, edge Ø 1 mm, shaft Ø 3 mm, total length 40 mm Processing type: fine finishing Blank material: zirconium dioxide Coating type: diamond Ring color: dark blue For milling machine: Tizian Cut 5 smart, Tizian Cut 5 smart plus Up to seven times greater tool life "
T14/T41/T51 Tizian Cut 5/3.5 Zirconia Drill diamond 1mm, 6 mm shaft
Diamond radius cutter, double-edged, edge Ø 1 mm, shaft Ø 6 mm, total length 53 mm, max. blank height: 25 mm Processing type: fine finishing Blank material: zirconium, nano-composite Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
T13/T40/T50Tizian Cut 5/3.5 Zirconia Drill diamond 2.5mm, 6 mm shaft
Diamond radius cutter, double-edged, edge Ø 2.5 mm, shaft Ø 6 mm, total length 53 mm Processing type: roughing Blank material: zirconium, nano-composite Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
Tizian Blank PMMA 98 x 20 mm, Color: A2
Variante:
A2 / 20 mm
The tooth-colored Tizian Blanks PMMA are suited to the production of crowns and bridges as long-term temporaries. The advantage of these tooth-colored resin blanks is their excellent physical properties. All Tizian Blanks PMMA can be used with or without veneers. In addition, it is possible to check fit and function of the restorations on a plaster model. Indications: Long-term temporaries (up to 6 months), suited to veneering with composite.
Double-toothed drill, 1,20 mm, diamond coating, zirconium dioxide, for Tizian Cut 5 smart
Flat cutter, double-edged, edge Ø 1.2 mm, shaft Ø 3 mm, total length 40 mm. The flat mill has an angle of 90°. Processing type: inside of screw seatings, implants, bars Blank material: zirconium dioxide Coating type: diamond Ring color: dark blue For milling machine: Tizian Cut 5 smart, Tizian Cut 5 smart plus Up to seven times greater tool life "
Impla 3D-Navi drill 3.15 mm x 22.5 mm,
Variante:
3,15 mm
22.5 mm long surgical drill for template guided implantation.
countersink cutter 3.3 for IMPLA 3D,
Variante:
3,3 mm
This tool mills the upper part of the implant in the cortical bones, and guarantees optimal primary stability of conical IMPLA implants.
Plaster drill 2,00mm for Impla 3D Theta,
Variante:
2 mm
With this, a corresponding hole in the plaster model is set up, in order to position the matching drilling sleeve.
T33/T43/T53 Tizian Cut 5/3.5 Zirconium/PMMA/Wax fissures-mill 0,3mm, 6mm shaft
Radius cutter double-edged, edge Ø 0.3 mm, shaft Ø 6 mm, total length 45 mm, max. blank height: 25 mm Processing type: removal of material residue Blank material: zirconium dioxide, PMMA, wax Coating type: coated Ring color: gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
Tizian Blank PMMA 98 x 20 mm, Color: transpa
Variante:
Tizian Blank PMMA 98 x 20 mm
Transparent PMMA with physical properties adjusted to those of natural teeth. This makes this material extremely gentle on the antagonists. The transparent Tizian Blanks PMMA will burn out residue-free. They are suited to the production of lost-material casting molds as well as to the production of functional splints and drilling templates. All Tizian Blanks PMMA can be used with or without veneers. In addition, it is possible to check fit and function of the restorations on a plaster model. Indications: Therapeutic splints, reflex splints, casting technology (material burns out), very dimensionally stable which makes it ideal for preliminary fittings.
Tizian Blank Wax grey 98 x 20 mm, Wax, Color: grey
Variante:
grey / 20 mm
Using this CAD/CAM blank you can mill your wax models and frameworks for moulding. The blank is available in several colors and heights. These blanks are characterised by a very good fit of subsequent work. Indications: Can be burned out as part of the casting technique during production of provisional restorations.
T14/T41/T51Tizian Cut 5/Tizian 1.5/ 2.5/ 3.5 zirconium drill diamond 1 mm, 3 mm shaft
Diamond radius cutter, double-edged, edge Ø 1 mm, shaft Ø 3 mm, total length 48 mm. Max. blank height = 25 mm. Processing type: fine finishing Blank material: zirconium Type: diamond polished Coding color: gold For the milling machines: Tizian Cut 5 without optional metal milling (3 mm shaft)
T13 Tizian Cut 5/Tizian 1.5/ 2.5/ 3.5 zirconium drill diamond 2.5 mm, 3 mm shaft
Diamond radius cutter, double-edged, edge Ø 2.5 mm, shaft Ø 3 mm, total length 48 mm. Max. blank height = 25 mm. Processing type: roughing Blank material: zirconium Type: diamond polished Coding color: gold For the milling machines: Tizian Cut 5 without optional metal milling (3 mm shaft)
T46 Tizian 3.5 1.0 mm premium torus drill for CoCr/Ti, T46, for 6 mm chuck
T46 - Torus drill, triple-edged, edge Ø 1.0 mm, shaft Ø 6 mm, total length 45 mm. Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian Cut 5.2 Pro, Tizian Cut 5.2 Pro Plus, Tizian Cut 5.2, Tizian Cut 5.2 plus, CORiTEC 550i, CORiTEC 750i
Tizian 3.5 1.5mm Premium torus mill for CoCr/Ti, T45, for 6mm chuck
T45 - Torus cutter for bars and abutments, triple-edged, cutting edge Ø 1.5 mm, shaft Ø 6 mm, total length 45 mm. Processing type: pre-finishing Blank material: CoCr, titanium Coating type: coated For milling machines: Tizian Cut 5.2 Pro, Tizian Cut 5.2 Pro Plus, Tizian Cut 5.2, Tizian Cut 5.2 plus, CORiTEC 550i, CORiTEC 750i
Tizian 3.5 2,0 mm premium radius cutter for CoCr/Ti, T2/T7, for 6 mm chuck
T2/T7, mill for pre-finishing, two-edged, edge Ø 2.0 mm, shaft Ø 6 mm, max. blank height = 25 mm. Finishing type: pre-finishing Blank material: CoCr, titanium Coating type: coated Ring color gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5.2 Pro, Tizian Cut 5.2 Pro plus, CORiTEC 550i, CORiTEC 750i
Tizian 3.5 0,6 mm premium radius cutter for CoCr/Ti, T20, for 6 mm chuck
T20 radius mill, double edged, edge Ø 1.0 mm, shaft Ø 6 mm, max. blank height = 25 mm. Robust tool for milling in the occlusal area. Finishing type: fine finishing Blank material: CoCr, titanium Coating type: coated Ring color gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5.2 Pro, Tizian Cut 5.2 Pro plus, CORiTEC 550i, CORiTEC 750i
Tizian 3.5 3,0 mm premium radius cutter for CoCr/Ti, T1/T6, for 6 mm chuck
Variante:
T1/T6 - Premium Radiusfräser 3,0mm für CoCr/Ti
T1/T6 and T26 radius cutter, two-edged, edge Ø 3.0 mm, shaft Ø 6 mm, max. blank height = 16 mm respectively 25 mm. For a blank height of 16 mm or higher, we recommend the use of T26 (art.-no. 523985) Finishing type: rough pre-machining Blank material: CoCr, titanium Coating type: coated Ring color gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5.2 Pro, Tizian Cut 5.2 Pro plus, CORiTEC 550i, CORiTEC 750i
T32 Tizian Cut 5/3.5 radius cutter for zirconia/PMMA/Wax, 0.6 mm, 6 mm shaft
T32 double-edged radius cutter, long, edge Ø 0.6 mm, shaft Ø 6 mm, max. blank height = 25 mm. Processing type: fine finishing Blank material: zirconium dioxide, PMMA, wax Coating type: uncoated Ring color: gold For milling machines: Tizian Cut 5, Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5.2 Pro, Tizian Cut 5.2 Pro plus, CORiTEC 550i, CORiTEC 750i
Impla position key long (IPK long),
As part of prosthetic planning, accurately defines the position of the implant in the master model, and guarantees identical implementation during surgery.
X-ray spheres 5 mm,
The spheres serve as reference objects in X-ray images. They allow you to take a measurement to determine the magnification factor of the X-ray unit. Content: 10 pcs.
MD-Kombi flask complete, duplicating flask
Muffle former and duplicating flask in one. This duplicating and investing system helps you save time and material. Contains: Flask ring, flask base, duplicating insert, duplicating sponge.
IMPLA position key (IPK),
As part of prosthetic planning, accurately defines the position of the implant in the master model, and guarantees identical implementation during surgery.
Tizian 3.5 1,5 mm premium flat drill for CoCr/Ti, T5/T10, for 6 mm chuck
T5/T10 shaft mill, two-edged, edge Ø 1.5 mm, shaft Ø 6 mm, max. blank heights = 25 mm. Finishing type: drilling screw threads, production of screw bearings Blank material: CoCr, titanium Coating type: coated Ring color gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5.2 Pro, Tizian Cut 5.2 Pro plus, CORiTEC 550i, CORiTEC 750i
T15/T42T52 Tizian Cut 5/3.5 Zirconia / PMMA drill 0.6mm, 6 mm shaft
Radius cutter, double-edged, edge Ø 0.6 mm, shaft Ø 6 mm, total length 53 mm, max. blank height: 25 mm Processing type: removal of residual material Blank material: zirconium, PMMA, wax, Lava Ultimate from 3M Espe, Tizian Zirconia Reinforced Composite Type: uncoated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
T4/T9 Tizian Cut 5/3.5 Metal Drill CoCr/Ti 1mm, 6 mm shaft
Radius cutter short, double-edged, edge Ø 1 mm, shaft Ø 6 mm, total length 45 mm. Max. blank height = short up to 15 mm, long up to 20 mm. Processing type: fine finishing Blank material: CoCr, titanium Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
T3/T8 Tizian Cut 5/3.5 ball-headed metal drill 1,5, CoCr/Ti balltop
Ball-end mill, double-edged, edge Ø 1.5 mm, shaft Ø 6 mm, total length 48 mm Processing type: drilling a screw channel Blank material: CoCr, titanium Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
T17 Tizian Cut 5/3.5 for zirconia/wax/PMMA drill 1,5 mm, 6 mm shaft
End mill/ torus mill long, double-edged, edge Ø 1.5 mm, shaft Ø 6 mm, total length 53 mm. Max. blank height = short up to 15 mm, long up to 20 mm. Processing type: fabrication of screw seating Blank material: Zirconcium dioxide, wax, PMMA Coating type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 with metal milling option (6 mm shaft), CORiTEC 550i, CORiTEC 750i
T29 Tizian Cut 5/3.5 Radius Cutter long for CoCr/Titanium 1,0mm, 6 mm shaft
End mill long, double-edged, edge Ø 1 mm, shaft Ø 6 mm, total length 53 mm. Max. blank height = short up to 15 mm, long up to 20 mm. Processing type: fine finishing Blank material: CoCr, titanium Type: coated Coding color: gold For the milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
T20 Tizian Cut 5/3.5 Metal mill for CoCr/Titanium 0.6mm, 6 mm shaft
Fissure mill, double-edged, edge Ø 0.6 mm, shaft Ø 6 mm, total length 45 mm. Processing type: removal of material residue Blank material: CoCr, Titan Coating type: coated Ring color: gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 metal option (6 mm shaft), CORiTEC 550i, CORiTEC 750i
T15 Tizian Cut 5/Tizian 1.5/ 2.5/ 3.5 zirconium/PMMA mill stand.0.6 mm, 3 mm shaft
Radius cutter, triple-edged, edge Ø 0.6 mm, shaft Ø 3 mm, total length 48 mm. Max. blank height = 25 mm. Processing type: removal of residual material Blank material: zirconium, PMMA, wax, PEEK, Tizian Zirconia Reinforced Composite Type: uncoated Coding color: gold For the milling machines: Tizian Cut 5 without optional metal milling (3 mm shaft)
T5/T10 4-Tooth mill 1.5 mm for Zirconium/PMMA/Wax/non-precious alloys/Titanium, for Tizian Cut 5/5.2 with 6 mm shaft
Flat-headed shaft mill short, four-edged, edge Ø 1.5 mm, shaft Ø 6 mm, total length 45 mm. Max. blank height = short up to 15 mm, long up to 20 mm. Finishing type: drilling screw threads, working on bars Blank material: CoCr, titanium, zirconium, PMMA, wax Coating type: coated Ring color: gold For milling machines: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 with metal option (6 mm shaft), CORiTEC 550i, CORiTEC 750i "
Testblank 98 x 15 mm for Tizian Cut 5.2, Acrylic
Use these blanks made of polyurethane to carry out test millings in the process of calibrating or re-measuring your Tizian Cut 5/Tizian Cjut 5.2/Tizian Cut 5.2 Pro. Produce special test copings to measure subsequently. Enter this data into the control system of milling machine.
Radius form cutter milling tool 1.0mm for glass ceramic, Tizian Cut 5 Smart
Diamond radius cutter, cutting edge Ø 1.0 mm, shaft Ø 3 mm, total length 35 mm. Also suitable for Tizian Cut compact. Finishing type: removal of residual material Blank material: glass ceramics Ring color: grey For milling machines: Tizian Cut 5 smart, Cut 5 smart plus, Tizian Cut compact
T30 Tizian Cut 5/3.5 PMMA flat-head/shaft drill, single-edged 4,0 mm, 6 mm shaft
Flat-headed shaft mill, single-edged, edge Ø 4 mm, shaft Ø 6 mm, total length 48 mm, max. blank height: 30 mm Finishing type: pilot milling Blank material: PMMA Coating type: uncoated Ring color: gold For milling machine: Tizian Cut 5.2, Tizian Cut 5.2 plus, Tizian Cut 5 option metal milling (6 mm shaft), CORiTEC 550i, CORiTEC 750i
zebris PS-1 bite fork,
The PS-1 bite fork transfers the NHP (Natural Head Position) which was determined with the Plane Finder system. With help of this bite fork, the zebris systems learn the NHP of the upper jaw in the PS1 articulator. This way, the individual inclination of the condylar path can be detected from the lower jaw movements. The product serves as a connection between zebris systems and the Plane Finder System.
Radius form cutter milling tool 0,6 mm for glass ceramic, Tizian Cut 5 Smart
Diamond radius cutter, edge Ø 0.6 mm, shaft Ø 3 mm, total length 35 mm. Also suitable for Tizian Cut compact. Processing type: removal of material residue Blank material: glass ceramics Ring color: grey For milling systems: Tizian Cut 5 smart, Tizian Cut 5 smart plus, Tizian Cut compact
T33 Tizian Cut 5/Tizian 1.5/ 2.5/ 3.5 zirconium/PMMA/Wax mill 0,3 mm, 3 mm shaft
Radius cutter, double-edged, edge Ø 0.3 mm, shaft Ø 3 mm, total length 48 mm. Max. blank height = 25 mm. Processing type: removal of residual material Blank material: zirconium, PMMA, wax Type: uncoated Coding color: gold For the milling machines: Tizian Cut 5 without optional metal milling (3 mm shaft)