Prosthetics Hex Connection

inner matrix, yellow/light

Three color-coded inner matrices with standardized shearing force are available.

torque wrench 4 Ncm

Wrench for matrices with pre-set torque of 4 Ncm (screw-in torque value)

retention cap, small

Matrix housing for cast model prostheses.

retention cap, large, for resin curing

Matrix housing for acrylic prostheses.

spacer for resin curing

Place holder for matrix housings.

model axis

Stainless steel laboratory analogue for production of models.

activator / deactivator

Inner matrix wrench for the inner matrix, gold.

Locator instrument, threepart

Wrench for locator abutments and insertion matrices - can be sterilized.

Locator impression post

Made from aluminium with black silicone insert.

Locator lab implant

Lab implant of the Locator-system.

Locator matrix set 3 parts

Consists of one insertion matrix each of clear, pink and blue, a blocking ring and a matrix housing with a black processing insert.

Locator, replacementplugin

Insertion matrix with retention 2.260 g shearing force.

Locator, plugin, small retention

Insertion matrix with retention 1.360 g shearing force.

Locator Extended Range, Replacement Male

Insertion matrix without retention1.360-1.800 g shearing force.

Locator, plugin, extended appl. small

Insertion matrix without retention 220-680 g shearing force.

Locator, adapter

Tool for unscrewing the Locator abutment with contra-angle.

Locator plugin, blue extra light

Insertion matrix with retention 680 g shearing force.

tool ratchet for locator adapter

For use in the torque ratchet.

IMPLA direct acrylic sleeve

For use with the IMPLA Direct Cones.

IMPLA direct titanium sleeve

For use with the Impla direct cones.

Impla direct cone 0°

Cone element for connection with the IMPLA direct base.

modelling aid

Facilitates individual modelling and subsequent casting of the upper construction.

carving aid (SAE)

Facilitates individual modelling and subsequent casting of the upper construction.

bar screw for modelling aid 636231

Screws individual bar constructions to the implant.

Vertical screw, 3 mm

Screw for final connection of the abutment and the implant.

Vertical screw, 1.5 mm

Screw for final connection of the abutment and the implant.

Vertical screw, blue

Screw for repeated use in the laboratory.

bridge screw for carving aid (SAE)

Connection screw for constructions on cone adapters.

parallel positioning aid

For straight placement of model axes in master models.

ball anchor 4/5.3 mm

Ball connector for anchored overdentures for the IMPLA hex connection range.

Locator abutment, d5,3x2,0 mm

The Locator® anchoring system is suitable for use in implant borne prosthetics, for resilient embedded full prostheses in the lower and upper jaw.

IMPLA direct basis 1.5/5.3 mm

Base abutment for passive connection of bars or screwed bridges.

Adhesive base, 4,2 mm dia, for crowns

Abutment for adhesive connection with zirconium dioxide frameworks, or as an individual hybrid abutment for the IMPLA hexagonal connection series.

Lab implant 5.3 mm

Titanium transfer element for accurate replication of implant position together with the impression aid for implants in the Hex Connection range.

Scanabutment 3,3mm

Abutment for digital scanning of model situations on the master model. For IMPLA hex connection.

Acrylic abutment 0°/3.3 mm

Individual acrylic abutment for adaptation by finishing and casting, for the IMPLA Hex Connection series.

Locator Impression male

Placer holder

Vertical screw POM

For optimal adhesion at the connection between adhesive basis and CAD/CAM elements.

Fixation screw OL

Fixation screw OL for use with forming aid Multi Unit

PreFace Abutment 5.3 mm / D = 16 mm

Titanium cylinder for the individual adaption of IMPLA implant abutments with Hex Connection internal geometry.

PreFace Abutment 5.3 mm / D = 11.5 mm

Titanium cylinder for the individual adaption of IMPLA implant abutments with Cone Connection internal geometry.

Prosthetic screw secondary

Special screws for the fixation of the restoration on Multi Unit Abutments

Cone adapter 4.2/3 mm

Abutment for construction of bars and to equalize severe divergences.

Impression post Multi Unit

Open impression with the fixation screw OL for impressions on the abutment level for the Multi Unit System.

Metal sleeve

Titanium sleeve made from titanium grade 5 - for friction-free glue fixing on abutments of the Multi Unit System.

Scanabutment

This bowling pin shaped PEEK abutment is excellently suited for digital measuring with optical scanners or laser scanners.

Plastic sleeve POM

Acrylic sleeve made of POM for the Multi Unit System, can be burned out.