Filter
The item has been added to your inquiry list
Micronium Exclusiv, 1 kg, CoCrMo alloy
The alloy for your cast attachments, implant supra-constructions and delicate frameworks. Benefits: Extremely hard High elongation at break Easily removed oxide Excellent to polish Extremely bright sheen after polishing For delicate model casting Suitable for large and also delicate construction Physical attributes Hardness: HV 398 Elongation at break: 6% Tensile strength: 980 µPa Specific weight: 8.3 g/cm2 Melting range: 1368-1385 °C Both alloys contain <, 0.5% carbon. They are suitable for lasers and will not become brittle (heat cracks). Both alloys have been tried and tested for more than 25 years. They are biologically safe and bio-compatible. Naturally, neither alloy contains nickel or beryllium or any other contentious ingredients.
Micronium N10, 1 kg, CoCrMo alloy
CoCr alloy specially for your delicate clamp frameworks.  , Benefits: Extremely high elongation at break (11%) Extremely high tensile strength (1680 N/mm 2) Easily removed oxide High level of safety and long life span Very high spring stiffness - particularly important for clamps Very good activation  , Physical attributes: Hardness: HV 340 Elongation at break: 11 % Tensile strength: 1.680 µPa Specific weight: 8.4 g/cm2 Melting range: 1343-1398 °C
Conical connector 5.3/15° GH=3, (for Cone Connection)
Variante:
15°/3 mm
This abutment made of titanium grade 5 with its conical implant connection geometry and its tailor-made emergence profile was specially developed for the IMPLA Cone Connection line. Supra constructions can be either cemented or adhesion-fixed.Available with gingiva heights of 1 mm, 3 mm or 5 mm and with angles of 0°, 15° or 20°.
Conical connector 3.3/15° GH=3, (for Cone Connection)
Variante:
15°/3 mm
This abutment made of titanium grade 5 with conical implant connection geometry and ready-made emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Conical connector 4.2/15° GH=1, (for Cone Connection)
Variante:
15°/1 mm
This abutment made of titanium grade 5 with its conical implant connection geometry and its tailor-made emergence profile was specially developed for the IMPLA Cone Connection line. Supra constructions can be either cemented or adhesion-fixed. Available with gingiva heights of 1 mm, 3 mm or 5 mm and with angles of 0°, 15° or 20°.
Conical connector 4.2/0° GH=5, (for Cone Connection)
Variante:
4,2 mm / 5 mm
This abutment made of titanium grade 5 with conical implant connection geometry and ready-made emergence profile is an accessory for the implants of the IMPLA Cone Connection series. Supra constructions can be fixed with cement or adhesive. Available for gingiva heights of 1 mm or 3 mm and for angles of 0° or 15°.
Conical connector 4.2 mm individ. millable, (for Cone Connection)
Variante:
4,2 mm
This grade 5 titanium abutment is adapted individually in the lab where angulation of greater than 15° is required with the IMPLA Cone Connection system.
Adhesive base 4.2 mm, CEREC, Cone Connection incl. screw
Variante:
Klebebasis CEREC 4,2 mm
Based upon the Sirona CEREC® System. CEREC® users now have the option of producing highly individual abutments. This is your set for individual abutments. The set contains all that you need for this task and helps you reduce the administrative complexity. The IMPLA CAD/CAM CEREC® adhesive base enables you to use CAD/CAM to design and manufacture customized implant abutments and single-tooth restorations for IMPLA implants. It is based on the Sirona CEREC® system. Every IMPLA CEREC® adhesive base has a laser inscription that specifies which ceramic block connection (S, L) and data path you should choose. Please order the Sirona scan bodies and ceramic blocks from your specialist retailer as usual.
PreFace Abutment 3.3 mm/D = 11.5 mm, (for Cone Connection)
Variante:
PreFace Abutment 3,3 mm / D = 11,5 mm
Our PreFace®-Abutments facilitate the use of PreFace®-Abutment Holders by Medentika. The PreFace®-Abutments are available in the diameters 11.5 mm and 16 mm and with the connection geometries Hex Connection and Cone Connection. This offers the user the necessary variability. The abutments are made of titanium grade 5 which makes them easy and safe to handle. Titanium grade 5 is also highly biocompatible.Your benefits:With PreFace Abutments® you will achieve a superior added value by flexibility – Use our PreFace®-Abutments together with the PreFace®-Abutment Holders by Medentika. saving time – Two different blank diameters guarantee significantly shorter working times in production. exact definition of the zero position – The uniform length despite the different diameters lets you define the zero position almost exactly. variability – The two different diameters 11.5 mm and 16 mm facilitate flexible work. precision – The preset production processes as well as the standard production processes provide for even more precise results. Material: Titanium grade 5
PreFace Abutment 5.3/D = 16 mm, (for Cone Connection)
Variante:
PreFace Abutment 5,3 mm / D = 16 mm
Our PreFace®-Abutments facilitate the use of PreFace®-Abutment Holders by Medentika. The PreFace®-Abutments are available in the diameters 11.5 mm and 16 mm and with the connection geometries Hex Connection and Cone Connection. This offers the user the necessary variability. The abutments are made of titanium grade 5 which makes them easy and safe to handle. Titanium grade 5 is also highly biocompatible.Your benefits:With PreFace Abutments® you will achieve a superior added value by flexibility – Use our PreFace®-Abutments together with the PreFace®-Abutment Holders by Medentika. saving time – Two different blank diameters guarantee significantly shorter working times in production. exact definition of the zero position – The uniform length despite the different diameters lets you define the zero position almost exactly. variability – The two different diameters 11.5 mm and 16 mm facilitate flexible work. precision – The preset production processes as well as the standard production processes provide for even more precise results. Material: Titanium grade 5
Adhesive base 5.3 mm, CEREC, (for Cone Connection)
Variante:
Klebebasis 5,3 mm, CEREC
Produce individual CAD/CAM designed and milled implant abutments and individual tooth restorations on IMPLA implants with the IMPLA adhesive base CAD/CAM CEREC®. Based upon the Sirona CEREC® System.
Acrylic abutment 5.3 mm, Cone Connection,
Variante:
5,3 mm
Model and cast individual abutments with this burn out material which leaves virtually no trace. This acrylic abutment combines well with the modelling waxes and acrylics used in most dental labs. This gives clean casting results and a good fit for all your technical dental work. Thanks to precisely manufactured hexagonal connection of the acrylic structure, you have a high degree of rotation protection. Indications: Bar restorations Individual crowns Bridges Temporary abutment
Vertical screw standard, Vertical screw for Impla Direkt GH 1.5 mm
Has a fine thread, which meshes perfectly with the inner thread of the implant, cold welded. This make it practically impossible for the abutment to become loose.
vertical screw blue,
Comes with the implant and helps repeated use when making prostheses in the laboratory. Item no 636649 is strongly recommended as the final connection screw.