Locator abutment D = 3.3 mm & 4.2 mm GH = 3.0, (Cone Connection)
Description
Original Zest Locator abutment for anchored overdentures for the IMPLA conical connection range.
Product number:
638584
Questions about the product? We are glad to be here for you!
Product information "Locator abutment D = 3.3 mm & 4.2 mm GH = 3.0, (Cone Connection)"
Modern prosthetic solution with the original Zest Locator abutment for the cover denture / full denture fixing technique for full or partial prostheses. The prosthesis keeps its firm hold due to the cylindrical shape of the Locator. The special shape of the retention facilitates a low installation height and a divergence equalisation up to 15°. Also in various sizes of acrylic holding matrices for polymerisation for the Impla conical connection range.
Accessories
adapter ratchet for Locator adapter contra-angle,
Tool for manual unscrewing the Locator abutment in conjunction with 636075 in the torque ratchet.
Locator plugin, extended range, 4 pcs./green,
Nylon matrix for insertion into the Locator matrix housing. Without centric retention, 20° divergence compensation, shearing force 1.360-1.800 g.
Locator adapter, with contra-angle connector,
Tool for unscrewing the Locator abutment with contra-angle or as an insert in conjunction with 636077 in the torque ratchet.
Locator plugin, extended range, light retention, 4 pcs./red
Nylon matrix for insertion into the Locator matrix housing. With centric retention, 20° divergence compensation, shearing force 220-680 g.
Locator plugin, extra light retention 4 pcs./blue,
Nylon matrix for insertion into the Locator matrix housing. With centric retention, 10° divergence compensation, shearing force 680 g.
Locator instrument, three-part,
Screwed stainless steel tip for removing retention inserts, mid section for repositioning the retention inserts, and gold coloured insertion aid for final screwing of the Locator®.
Locator matrix set (3 parts),
In the smallest version, the Locator® has a total height of 3.3 mm with a retention housing and nylon insert. ,This makes the Locator® System also suitable in circumstances where vertical space is limited.
Locator plugin, light retention, 4 pcs./pink,
Nylon matrix for insertion into the Locator matrix housing. With centric retention, 10° divergence compensation, shearing force 1.360 g.
Locator replacement plugin, 4 pcs./clear,
Nylon matrix for insertion into the Locator matrix housing. With centric retention, 10° divergence compensation, shearing force 2.260 g.
Cutsomers also bought
Adhesive base, 4.2 mm, (for Cone Connection)
Using this titanium base (titanium grade 5), you can glue both individual crowns and bridge constructions made from ZrO2. For this, we recommend Sebond Implant and Alphalink Implant.
Locator abutment D = 3.3 mm & 4.2 mm GH = 1.0, (Cone Connection)
Modern prosthetic solution with the original Zest Locator abutment for the cover denture / full denture fixing technique for full or partial prostheses. The prosthesis keeps its firm hold due to the cylindrical shape of the Locator. The special shape of the retention facilitates a low installation height and a divergence equalisation up to 15°. Also in various sizes of acrylic holding matrices for polymerisation for the Impla conical connection range.
Gingiva former conical 4.2/2 mm, (for Cone Connection), sterile
Titanium grade 5 healing component with processed emergence profile for implants in the conical connection range. With this, you can displace the gingiva without any pain, in order to prepare an aesthetically appropriate design of the final prosthesis. The formers can be fitted over the crestal 1.2 mm hexagonal connector both manually and mechanically. ,
Cylindrical (Hex Connection) 3.6/11.5 mm, sterile,
Whether it’s the upper or lower jaw, hard or soft bone - the IMPLA cylindrical implant is the answer to the everyday demands of implantology. The basic cylindrical shape is complemented by synchronous threading to the implant shoulder. In the same way, the surface of the cylindrical implant is sanded and etched to the implant shoulder. Alongside very good primary stability, even in cancellous bones, the cylindrical implant design gives you a high degree of flexibility. In particular, the insertion depth can be adapted very quickly by the surgeon. The self-tapping thread reduces the amount of surgery needed. Integrated Platform Switching ensures better preservation of the marginal bone. Benefits: Hex connection for rotation-secure connection between implant and abutment. Special micro-thread with a pitch of 0.8 mm for very high primary stability. Large Bone Lock for easy insertion and increased removal protection. Integrated Platform Switching to improve the soft tissue attachment. Self-tapping thread for a maximum level of surgical flexibility Microstructured, high-purity surface for optimal cell adaptation and safe osseointegration
Adhesive base D 4.2 mm,
Use this titanium base (titanium grade 5) to glue both individual crowns and bridge constructions made from ZrO2. We recommend the use of Sebond Implant and Alphalink Implant for this procedure.
Adhesive base, 3.3 mm, (for Cone Connection)
Using this titanium base (titanium grade 5), you can glue both individual crowns and bridge constructions made from ZrO2. For this, we recommend Sebond Implant and Alphalink Implant.