Impression

Closed Impression Technique The IMPLA impression posts are color-coded in line with the implant diameter and equipped with a transfer cover and vertical screw. A preassembled impression tray can be used for the closed tray impression technique. To secure the impression post in place, the vertical screw should be carefully hand-tightened both in the implant and on the laboratory implant using the 1.2 mm screwdriver. The transfer cover (repositioning aid) is pushed onto the impression posts until a noticeable pressure point is overcome and the transfer cover is clearly secure. equipped with a fixing screw (art. no. 636658) and transfer cover (art. no. 635495) "

Open Impression Technique The IMPLA impression posts are color-coded in line with the implant diameter and are equipped with a short or long fixing screw. The elongated section of the implant axis of the customized impression tray to be created must be perforated so that the fixing screw protrudes from the impression post. To secure the impression post in place, the fixing screw should be carefully hand-tightened both in the implant and on the laboratory implant using the 1.2 mm screwdriver.

Titanium transfer element for accurate replication of implant position together with the impression aid for implants in the conical connection range. Can be used with both the open and the closed impression technique. ,

The IMPLA Laboratory Scan Abutments Cone Connection are intended for transferring the position of Cone Connection implants in the master cast to a digital 3D image using a laboratory 3D scanner. They also facilitate, for instance, a digital transfer to a dental laboratory where they are used for the fabrication of dentures using computer-aided design and manufacturing systems.